Dell Z9264F-ON EMC PowerSwitch BMC User Guide March 2021 - Page 43

Update BMC in DIAG OS

Get Dell Z9264F-ON PDF manuals and user guides View all Dell Z9264F-ON manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Figure 3. Boot up screen Figure 4. BIOS setup and configuration screen 2. Use the scrollbar on the right side of the console window to scroll up to display the BIOS and CPLD versions. Figure 5. Display BIOS and CPLD versions Update BMC in DIAG OS Use the following DIAG OS command to update BMC: updatetool -D MAIN-BMC -U -e ./-BMC-vx.xx.ima NOTE: Switch to the BMC console to monitor the BMC update status. Confirm BMC updates. Reboot the system. Go to the BIOS update. Update the BMC using the following command: #updatetool -D MAIN-BMC -U - e Replace with the file from the USB drive that is mounted. Firmware update 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
Figure 3. Boot up screen
Figure 4. BIOS setup and configuration screen
2.
Use the scrollbar on the right side of the console window to scroll up to display the BIOS and CPLD versions.
Figure 5. Display BIOS and CPLD versions
Update BMC in DIAG OS
Use the following DIAG OS command to update BMC:
updatetool -D MAIN-BMC -U -e ./<
platform
>-BMC-vx.xx.ima
NOTE:
Switch to the BMC console to monitor the BMC update status. Confirm BMC updates. Reboot the system. Go to
the BIOS update.
Update the BMC using the following command:
#updatetool -D MAIN-BMC -U - e
<BMC_update_filename>
Replace
<BMC_update_filename>
with the file from the USB drive that is mounted.
Firmware update
43