Dell Z9264F-ON EMC PowerSwitch BMC User Guide March 2021 - Page 42
USB-based firmware update, BIOS access process, Power on the switch
View all Dell Z9264F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
USB-based firmware update Update your BMC, BIOS, and CPLD firmware with the following commands: Power on the switch Plug in the power cable to the back of the switch. The switch powers up immediately. Create a serial console connection To establish a console connection, use a universal serial bus (USB)-to-RS-232 connection from a USB port to the switch console port. NOTE: The baud rate is 115200. BIOS access process 1. Press delete after the POST Lower DRAM Memory test appears on the screen. Continue pressing delete to progress to the BIOS setup and configuration screen. NOTE: If the BIOS setup and configuration screen window passes, power off and power on the platform again to restart the boot up process. Figure 2. Initial boot up screen 42 Firmware update