Denon 556S Owners Manual - Page 22

DVD SETUP Display Setting You can change certain aspects of the DVD display screens, still mode setting, the display panel on the front of the DVD player and Progressive settings. 1 Press the SETUP button in stop mode. 2 Press the Cursor buttons (s or B) to select CUSTOM, then press the ENTER button. • The custom mode will appear. 3 Press the Cursor buttons (s or B) to select DISPLAY, then press the ENTER button to confirm. DISPLAY TV ASPECT STILL MODE PROGRESSIVE PROG.MODE 4:3 LETTER BOX AUTO OFF AUTO1 4 Press the Cursor buttons (K or L) to select an item, then press the ENTER button. TV ASPECT (Default : 4:3 LETTER BOX) QUICK • Press the Cursor buttons (K or L) for an item selection, then press the ENTER button. • Select 4:3 LETTER BOX for a black bars appears on top and bottom of the screen. DISPLAY TV ASPECT 4:3 LETTER BOX 4:3 PAN & SCAN 16:9 WIDE • Select 4:3 PAN & SCAN for a full height picture with both sides trimmed. • Select 16:9 WIDE if a wide-screen TV is connected to the DVD player. STILL MODE (Default : AUTO) • Press the Cursor buttons (K or L) for an item selection (AUTO, FIELD, or FRAME), then press the ENTER button. DISPLAY STILL MODE AUTO FIELD FRAME • This function allows you to adjust picture resolution and quality in still mode. • An individual picture on TV screen is called as "frame", which consists of two separate images called as "field". Some pictures may be blurred at the AUTO setting in still mode due to their data characteristics. • AUTO: Automatically selects the best resolution setting (FRAME or FIELD) based on the data characteristics of the pictures. • FIELD: Select FIELD when the pictures are still unsta- ble even if AUTO is selected. FIELD stabilizes the pic- tures, although the picture quality may become coarse due to the limited amount of data. • FRAME: Select FRAME to display relatively motionless pictures in higher resolution. FRAME improves the pic- ture quality, although it may unstabilize the pictures due to simultaneous output of two field data. PROGRESSIVE (Default: OFF) QUICK • Press the Cursor buttons (K or L) for set PROGRESSIVE to ON or OFF, then press the ENTER button. DISPLAY • The setting will be effective when you exit the setup screen by pressing SETUP. TV ASPECT STILL MODE PROGRESSIVE PROG.MODE 4:3 LETTER BOX AUTO OFF AUTO1 • When PROGRESSIVE is ON, P.SCAN appears on the DVD player's display after you exit the setup screen. • Refer to page 11 for more details. PROG.MODE (Default: AUTO1) • Press the Cursor buttons (K or L) to select a setting (AUTO1, AUTO2, or VIDEO), then press DISPLAY PROG. MODE AUTO1 the ENTER button. AUTO2 VIDEO • This function allows you to select the image output, depending on the base material (video or film) of the recorded DVD images, when VIDEO OUT is set to COMPONENT PROGRESSIVE. • AUTO1: Automatically selects the best image output (AUTO2 or VIDEO) based on the information of data stream. • AUTO2: A combination of the top and bottom fields is output as one-frame image. • VIDEO: Either of top or bottom field is output for oneframe image. 5 Press the SETUP button to exit and activate the new settings. Audio Setting You can change some Audio settings. It only affects during the playback of DVD discs. 1 Press the SETUP button in stop mode. 2 Press the Cursor buttons (s or B) to select CUSTOM, then press the ENTER button. • The custom mode will appear. 3 Press the Cursor buttons (s or B) to select AUDIO, then the ENTER button to confirm. 4 Press the Cursor buttons (K or L) button to select an item, AUDIO DRC LPCM SELECT DOLBY DIGITAL DTS ON OFF BITSTREAM BITSTREAM then press the ENTER button. • This menu display contains 2 pages. Press the Cursor button (L) repeatedly to show the next page. DRC (Dynamic Range Control) (Default : ON) • DRC function compresses the range of sound volume. • DRC function is available only on the discs that are recorded in the Dolby Digital format. AUDIO DRC LPCM SELECT DOLBY DIGITAL DTS ON OFF BITSTREAM BITSTREAM LPCM SELECT (Default : OFF) • Set to ON when outputting in 48kHz (or 44.1kHz). • This function is available only on digital outputting of a disc recorded in over 96kHz (or 88kHz). AUDIO DRC LPCM SELECT DOLBY DIGITAL DTS ON OFF BITSTREAM BITSTREAM When playing disc with copyright protection • The sound will be down sampled at 48kHz, even if you set to OFF. DOLBY DIGITAL (Default: BITSTREAM) QUICK • Set to BITSTREAM when the player is connected to a Dolby Digital decoder. AUDIO DRC LPCM SELECT DOLBY DIGITAL DTS ON OFF BITSTREAM BITSTREAM • This function is effective only for the COAXIAL and OPTICAL connections. BITSTREAM: DOLBY DIGITAL signals are output as Bitstream. PCM: Convert Dolby Digital to PCM. DTS (Default: BITSTREAM) QUICK • Set to BITSTREAM when the unit is connected to a DTS decoder. BITSTREAM: DTS signals are output as Bitstream. AUDIO DRC LPCM SELECT DOLBY DIGITAL DTS ON OFF BITSTREAM BITSTREAM OFF: No DTS sound will be output. • DTS sound is output only from digital audio outputs. 5 Press the SETUP button to exit and activate the new settings. - 22 - EN