Denon AVR-1506 Owners Manual - Page 14
Connecting the MULTI ZONE terminals
View all Denon AVR-1506 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ENGLISH Connecting Other Sources 2 AM loop antenna assembly Connect to the AM antenna terminals. 1 2 3 Remove the vinyl tie and take out the connection line. 4 a. Antenna placed on a stable surface. Mount Bend in the reverse direction. b. Hanging the antenna on a wall. Use the installation hole to secure the antenna to a wall, etc. Connection of AM antennas 1. Push the lever. 2. Insert the conductor. 3. Return the lever. Connecting Other Sources ZONE2 speaker out connections • When the power amplifier is assigned to the ZONE2 output channel at "Power Amp Assignment", the surround back speaker terminals can be used as the ZONE2 speaker out terminals ( page 35). • The connections diagram below is an example for when the surround back speaker is assigned to the ZONE2 stereo 2 channel. In this case, surround back speaker out can not be used for MAIN ZONE. Subwoofer Center speaker Surround speaker systems IN Connection terminal for subwoofer with built-in amplifier (subwoofer), etc. >< (L) (R) > < Connecting the MULTI ZONE terminals For instructions on operations using the MULTI ZONE functions ( page 35, 36). Connecting a room-to-room remote control unit When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 using the remote control unit. RC-617 INFRARED SENSOR Extension terminals for future use. + + AUX OUT OUTPUT INPUT RC-616 INFRARED RETRANSMITTER (L) (R) >< Front speaker systems (B) NOTE: • For instructions on installation and operation of separately sold devices, refer to the devices' operating instructions. 11 ENGLISH (L) (R) >< Front speaker systems (A) (L) (R) > < ZONE2 speaker systems NOTE: • The settings must be changed to use this speaker for ZONE2 ( page 16).