Denon AVR-1506 Owners Manual - Page 32

ENGLISH Basic Operation CH SELECT CURSOR F CURSOR G INPUT SELECTOR PRESET POWER SHIFT ON/STANDBY BAND TUNING TUNER MODE MEMORY Basic Operation TUNING PRESET SHIFT BAND Channel Level You can adjust the channel level either according to the playback sources or to suit your taste, as described below. 1 Press the CH SELECT button to select the speaker whose level you want to adjust. The channel switches as shown below each time the button is pressed. FL C FR SR SW SL SBL SBR When the surround back speaker setting is set to "1sp" for "Speaker Configuration", this is set to "SB". "SB" appears only when the "Power Amp Assign." setting is the surround back mode. 2 Press the CURSOR F or G button to adjust the level of the selected speaker. Listening to the radio Auto preset memory This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in the preset memory. Hold the PRESET • button and press the POWER switch on the main unit. • The unit automatically begins searching for FM broadcast stations. When the first FM broadcast station is found, that station is stored in the preset memory at channel A1. Subsequent stations are automatically stored in order at preset channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to F8 and G1 to G8 for a maximum of 56 stations. Channel A1 is tuned in after the auto preset memory operation is completed. 2 DEFAULT SETTINGS A1 ~ A8 B1 ~ B8 C1 ~ C8 D1 ~ D8 E1 ~ E8 F1 ~ F8 G1 ~ G8 Auto tuner presets 87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 MHz 520 / 600 / 1000 / 1400 / 1500 / 1710 kHz, 90.1 / 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz The default setting of the channel level is 0 dB. The level of the selected speaker can be adjusted within the range of +12 to -12 dB by pressing the CURSOR buttons. The SW channel level can be turned off by decreasing it one step from -12 dB. OFF ´ -12 dB ´ +12 dB • If an FM station cannot be preset automatically due to poor reception, use the "Manual tuning" operation to tune in the station, then preset it using the manual "Preset memory" operation. • To interrupt this function, press the ON/STANDBY switch. 29 ENGLISH