Denon AVR-1506 Owners Manual - Page 30

ENGLISH Basic Operation SURROUND MODE • When the MONO MOVIE, ROCK ARENA, JAZZ CLUB and VIDEO GAME mode: ROOM SIZE EFFECT LEVEL TONE DEFEAT DEFAULT SURROUND BACK • When the MATRIX mode: DELAY TONE DEFEAT DEFAULT SURROUND BACK • When the VIRTUAL mode: ENTER CURSOR F SURROUND PARAMETER CURSOR G TONE DEFEAT DEFAULT If you do want the bass and treble to be adjusted, turn off the tone defeat mode. 3 Press the SURROUND PARAMETER button to select the various parameters. DSP surround simulation 2 To operate the surround mode and the surround parameters from the remote control unit 1 Select the surround mode for the input channel. 4 Press the CURSOR F or G button to set the various parameters. • ROOM SIZE setting: ROOM SIZE MED (Remote control unit) The surround mode switches in the following order each time the DSP SIMULATION button is pressed: MONO MOVIE ROCK ARENA MATRIX VIDEO GAME JAZZ CLUB SMALL MED-S MED • EFFECT LEVEL setting MED-L LARGE EFFECT LEVEL 10 • DELAY TIME setting 1 10 15 2 Press the SURROUND PARAMETER button to enter the surround parameter setting mode. The surround parameter switches in the following order each time the SURROUND PARAMETER button is pressed for the different surround modes. DELAY 30ms 0ms 30ms 110ms • D. COMP. setting Basic Operation D.COMP. OFF OFF LOW MID HIGH This parameter is displayed during DOLBY DIGITAL playback. • LFE setting LFE 0dB -10dB -5dB 0dB This parameter is displayed during DOLBY DIGITAL and DTS playback. • TONE DEFEAT setting TONE DEF. ON ON OFF • SURROUND BACK SPEAKER setting SB : ON ON OFF This parameter is displayed during DOLBY DIGITAL playback. • DEFAULT setting DEFAULT Y/N YES Y/N NO Select "YES" to reset to the factory defaults. 5 Press the ENTER button to finish the surround parameter mode. • When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed. 27 ENGLISH