Denon AVR-1506 Owners Manual - Page 38

ENGLISH Advanced Operation Multi zone music entertainment system • ZONE2 speaker out can be used when "ZONE2" is selected at "Power Amp Assignment". In this case, surround back speaker out cannot be used for MAIN ZONE. • When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 using the remote control unit. ZONE2 OFF Advanced Operation ZONE2 ON • For instructions on installation and operation of separately sold devices, refer to the devices' operating instructions. 2 When using the SURR.BACK/ZONE2 amplifier as the ZONE2 • To use the ZONE2, turn on the ZONE2 button. • The output of the ZONE2 SPEAKER OUT terminals can be adjusted with the remote control unit's ZONE2 VOLUME button. • The input source selected with the INPUT SELECTOR knob is output for the ZONE2 speaker output. [System configuration and connections example] Using this unit's internal amplifier as the ZONE2. MAIN ZONE 5.1-channel systems Monitor FL DVD player B Input C This unit FR SW ZONE2 SPEAKER OUT ZONE2 RC-617 SL RC-616 SR SYSTEM REMOTE CONTROL UNIT RC-1000 PROGRAMMABLE REMOTE CONTROL UNIT : ROOM-TO-ROOM REMOTE CONTROL SYSTEM (separately sold) control line : SPEAKER cable Refer to "Connections" ( page 11). MODE 1 CHANNEL MODE 2 VOLUME Remote control unit operations during multi-source playback (selecting the source) This is only possible when the main unit in the ZONE2 mode ( page 16). 1 Set the MODE 1 switch to the "AUDIO". 2 Set the MODE 2 switch to the "ZONE2". 3 Press the ZONE2 ON button. To cancel the ZONE2 mode: Press the ZONE2 OFF button. 4 The output level of the ZONE2 SPEAKER OUT terminals can be controlled pressing the VOLUME button on the remote control unit. Default setting (ZONE2 VOLUME LEVEL): - - - dB (MINIMUM) 35 ENGLISH