Denon AVR-1506 Owners Manual - Page 20
System setup items and default values set upon shipment from the factory
View all Denon AVR-1506 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ENGLISH System Setup System setup items and default values (set upon shipment from the factory) System Setup Input the combination of speakers in your system and their 1 Speaker Configuration corresponding sizes (SMALL for regular speakers, LARGE for full-size, full-range) to automatically set the composition of the signals output from the speakers and the frequency response. 2 Delay Time This parameter is for optimizing the timing with which the audio signals are produced from the speakers and subwoofer according to the listening position. 3 Subwoofer Mode 4 Crossover Frequency This selects the subwoofer speaker for playing deep bass signals. Sets the frequency (Hz) below which the bass sound of the various speakers is to be output from the subwoofer. 5 Test Tone This adjusts the volume of the signals output from the speakers and subwoofer for the different channels in order to obtain optimum effects. 6 Digital In Assignment Auto 7 Surround Mode 8 Ext. In SW Level 9 Power Amp Assignment This assigns the digital input terminals for the different input sources. Input source Digital Inputs Auto surround mode function setting. Sets the Ext. In Subwoofer channel playback level. Sets this to switch the surround back channel's power amplifier for ZONE2 use. Front Sp. Large Front L & R 12 ft Default settings Center Sp. Subwoofer Surround Sp. Surround Back Sp. Small Yes Small Center 12 ft Subwoofer 12 ft Surround L & R 10 ft Subwoofer mode = Normal Small / 2sp Surround Back L & R 10 ft Front L & R 0 dB CD Center 0 dB 80 Hz Subwoofer 0 dB AUX Surround L & R 0 dB Surround Back L & R 0 dB DVD / VDP COAXIAL1 COAXIAL2 OPTICAL Auto Surround Mode = ON Ext. In SW Level = +15 dB Surround Back Page 12, 13 13, 14 14 14 15 16 16 16 16 System Setup 17 ENGLISH