Denon AVR-1804 Owners Manual - Page 20

ENGLISH 10 SETTING UP THE SYSTEM • Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 10 to 18), make the various settings described below on the display. These settings are required to set up the listening room's AV system centered around the this unit. • Use the following buttons to set up the system: 1 Set the slide switch to "AUDIO". 2 Use the following buttons to set up the system: SYSTEM SETUP button Press this to display the system setup on the display. CURSOR buttons (•, ª, 0, 1) Press this change what appears on the display. ENTER button Press this to switch the display. Also use this button to complete the setting. • System setup items and default values (set upon shipment from the factory) Speaker Configuration Subwoofer mode Crossover Frequency Delay Time Test Tone System setup Input the combination of speakers in your system and their corresponding sizes (SMALL for regular speakers, LARGE for fullsize, full-range) to automatically set the composition of the signals output from the speakers and the frequency response. This selects the subwoofer speaker for playing deep bass signals. Set the frequency (Hz) below which the bass sound of the various speakers is to be output from the subwoofer. This parameter is for optimizing the timing with which the audio signals are produced from the speakers and subwoofer according to the listening position. This adjusts the volume of the signals output from the speakers and subwoofer for the different channels in order to obtain optimum effects. Front Sp. Center Sp. Default settings Surround Sp. Surround Back Sp. Subwoofer Large Small Small Small Yes LFE (Normal) 80 Hz Front L 12 ft Front L 0 dB Front R 12 ft Front R 0 dB Center 12 ft Center 0 dB Surround L Surround R Surround Back Subwoofer 10 ft 10 ft 10 ft 12 ft Surround L Surround R Surround Back Subwoofer 0 dB 0 dB 0 dB 0 dB Digital In Assignment This assigns the digital input jacks for the different input sources. Input source Digital Inputs CD COAXIAL DVD/VDP TV/DBS OPTICAL 1 OPTICAL 2 VCR-1 OFF VCR-2 OFF CDR/TAPE OPTICAL 3 Input source DVD/VDP TV/DBS VCR-1 VCR-2 V. AUX - Video In This assigns the component video input jacks for Assignment the different video input sources. Component Inputs VIDEO 1 VIDEO 2 OFF OFF OFF - Auto Surround Mode Auto surround mode function setting. Auto Surround Mode = ON Ext. In SW Level Set the Ext. In Subwoofer channel playback level. Ext. In SW Level = +15 dB Power AMP Assignment On Screen Display Auto Tuner Presets Set this to switch the surround back channel's power amplifier for use for Zone 2. This sets whether or not to display the on-screen display that appears on the monitor screen when the controls on the remote control unit or main unit are operated. FM stations are received automatically and stored in the memory. A1 ~ A8 B1 ~ B8 C1 ~ C8 D1 ~ D8 E1 ~ E8 Surround Back ON 87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz 520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz 20