Denon AVR-1804 Owners Manual - Page 47
Surround parameters, Pro Logic, Panorama Control, Dimension Control, Center Width Control, DTS NEO:6
View all Denon AVR-1804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
ENGLISH 3 Play a program source. 4 Select the surround parameter mode. Display MODE cinema 8 When the surround parameters are set using the buttons on the main unit, stop operating buttons after completing the settings. The settings are automatically finalized and the normal display reappears after several seconds. 9 Press the ENTER button to finish surround parameter mode. (Main unit) (Remote control unit) To perform this operation from the remote control unit, check that the mode selector switch is set to "AUDIO". 5 Select the optimum mode for the source. (Main unit) MODE cinema or (Remote control unit) MODE music or 6 Select the various parameters. (Main unit) (Remote control unit) (Remote control unit) 7 Set the various surround parameters. (Main unit) (Remote control unit) (Remote control unit) Surround parameters q Pro Logic II Mode: • The Cinema mode is for use with stereo television shows and all programs encoded Dolby Surround. • The Music mode is recommended as the standard mode for autosound music systems (no video), and is optional for A/V systems. • The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source contents is not of optimum quality. Select one of the modes ("cinema", "music" or "Pro Logic"). Panorama Control: This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging. Select "OFF" or "ON". Dimension Control: This control gradually adjust the soundfield either towards the front or towards the rear. The control can be set in 7 steps from 0 to 6. Center Width Control: This control adjust the center image so it may be heard only from the center speaker; only from the left/right speakers as a phantom image; or from all three front speakers to varying degrees. The control can be set in 8 steps from 0 to 7. DTS NEO:6 Mode: • Cinema This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1channel sources. This mode is effective for playing sources recorded in conventional surround formats as well, because the in-phase component is assigned mainly to the center channel (C) and the reversed phase component to the surround (SL, SR and SB channels). • Music This mode is suited mainly for playing music. The front channel (FL and FR) signals bypass the decoder and are played directly so there is no loss of sound quality, and the effect of the surround signals output from the center (C) and surround (SL, SR and SB) channels add a natural sense of expansion to the sound field. CENTER IMAGE (0.0 to 0.5: default 0.2): The center image parameter for adjusting the expansion of the center channel in the DTS NEO:6 MUSIC mode has been added. 47