Denon AVR-1804 Owners Manual - Page 42
Zone2, Source
View all Denon AVR-1804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
ENGLISH Multi-source playback [1] Outputting a program source to an amplifier, etc., in a different room (ZONE2 mode) 1 Press the ZONE2/REC button. The display switches as follows each time the button is pressed. 2, 4 1 2 2 With "ZONE2 SOURCE" displayed, turn the FUNCTION knob and select the source you wish to record. (Main unit) (Main unit) 3 Start playing the source to be output. • For operating instructions, refer to the manuals of the respective components. 4 To cancel, turn the function knob and select "SOURCE". (Main unit) Display 2 PHONO CD TUNER DVD / VDP TV / DBS ZONE2 VCR -1 -2 V.AUX CDR / TAPE ZONE2 SOURCE NOTES: • The signals of the source selected in the ZONE2 mode are also output from the VCR-1, VCR-2 and CDR/TAPE recording output terminals. • Digital signals are not output to the ZONE2 output jacks. [2] Remote control unit operations during multi-source playback (selecting the source) 1 Set the slide switch to "AUDIO" and "ZONE2". 2 (Remote control unit) 2 Press the ZONE2 "ON" button. To cancel the ZONE2 mode. Press the ZONE2 "OFF" button. (Remote control unit) 2 3 Press the input source button. • The ZONE2 source switches directly. 4 The output level of the ZONE 2 SPEAKER OUT terminals can be controlled using the 3 VOLUME + and - buttons on the remote control unit. (Remote control unit) 1 DEFAULT SETTING (ZONE2 VOLUME LEVEL) : - - - dB (MINIMUM) 5 When the ZONE2 SOURCE function is set to TUNER, the preset channel can be selected using the CHANNEL + and - buttons on the remote control unit. (This is only possible when the main unit in the ZONE2 mode.) (Remote control unit) (Light) The main zone output can be turned on and off with the "MAIN ON/OFF" button. 5 1 4 42