Denon AVR 1909 Owners Manual - English - Page 12

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting Specifications ENGLISH Video Conversion Function • This function automatically converts various formats of video signals input to the AVR-1909 into the format used to output the video signals from the AVR-1909 to a monitor. • The AVR-1909's video input/output circuitry is compatible with the following four types of video signals: Digital video signals: HDMI Analog video signals: Component video, S-Video and Video GFlow of video signals inside the AVR-1909H High picture quality playback HDMI connector HDMI connector About On-screen Displays due to Input Signals The method of on-screen display (OSD) varies with the type of video signal input to AVR-1909. Video signal being used Menu display Momentary status display when operating (Display when changing the input source, volume, etc.) HDMI connector / Component video connectors OSD only display Turn display off S-Video connector / Video connector Display of OSD superimposed on the input image Turn display on Component video connectors S-Video connector Component video connectors S-Video connector Monitor Video connector Video connector Video input terminals Monitor output terminals : When 480i/576i signals are input • When not using this function, connect a monitor output with the same type of connector as the video input connector. • The resolution of the HDMI input-compatible monitor connected to the AVR-1909 can be checked at menu "Information" - "HDMI Information" (vpage 53). NOTE • HDMI signals cannot be converted into analog signals. • 1080p component video input signals cannot be output to anything other than component video connectors. • 480p/576p, 1080i and 720p component video input signals cannot be converted into S-Video or Video format. • When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate.