Denon AVR 1909 Owners Manual - English - Page 54

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting Specifications ENGLISH RESTORER This function restores compressed audio signals to how they were before compression and corrects the sense of volume of the bass and treble to obtain richer playback sound. [Selectable items] OFF : Do not use RESTORER. Mode1 (RESTORER 64): Optimized mode for compressed sources with very weak highs. Mode2 (RESTORER 96): Apply suitable bass and treble boost for all compressed sources. Mode3 (RESTORER HQ): Optimized mode for compressed sources with normal highs. The default setting for "iPod" is "Mode3". All others are set to "OFF". When set to something other than "OFF", " " is displayed. OFF Mode 1 Mode 2 (RESTORER 64) (RESTORER 96) Mode 3 (RESTORER HQ) Operating from the main unit or main remote control unit Press RESTORER. Night Mode Optimized setting for late-night listening. Set the dynamic range compression of the output audio. [Selectable items] OFF : Turn night mode off. Low : Low setting. Mid : Middle setting. High : High setting. Operating from the main remote control unit Press [NIGHT]. The " " indicator lights when "Low", "Mid" or "High" is selected. OFF Low Mid High NOTE • W hen the "Dynamic EQ" setting is "ON", setting is not possible. • W hen a HD-Audio (DOLBY DIGITAL Plus, DOLBY TrueHD, DTS-HD) signal is input, the "Night Mode" can not be selected. Audio Delay Compensate for mismatched timing between video and audio. Delay audio. This sets the delay time for audio signals. [Variable range] 0 ms ~ 200 ms If you wish to adjust the "Audio Delay" while playing HDMI or component video signals, press u to set "OSD" to "OFF". This way the audio delay can be adjusted while watching the picture. (Press u again to switch to the on-screen display.) Operating from the main remote control unit Press [AUDIO DELAY], then press o p to adjust audio delay. NOTE When operating by remote control, the onscreen display is not shown. • T his cannot be adjusted when playing in the EXT. IN, DIRECT or STEREO mode (with "Front Speaker" set to "Large", "Tone Control" to "OFF" and "MultEQ", "RESTORER" and "Night Mode" to "OFF"). • W hen the Auto Lipsync Correction function is operating, you can set within the range 0 ~ 100 ms. • S tore "Audio Delay" for each input source. About the RESTORER function • Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals. • This is displayed on the menu and can be set when the input source is selected to "XM", or analog signals (including FM/AM and SIRIUS signals) or PCM signals (fs = 44.1/48 kHz) are input. 51 For details on adjusting individual parameters, see "Adjusting the parameters" (vpage 46).