Denon AVR-2312CI AVR-2312CI Owners Manual
Denon AVR-2312CI Manual
 |
UPC - 883795002035
View all Denon AVR-2312CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Denon AVR-2312CI manual content summary:
- Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 1
Basic version Advanced version INTEGRATED NETWORK AV RECEIVER AVR-2312CI Owner's Manual Information - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 2
, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product. 3. IMPORTANT When connecting this product to network hub or router, use only a shielded - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 3
Basic version n NOTES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust. • Unplug the power cord when not using the - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 4
87 AUDIO/VIDEO ADJUST 94 SYSTEM SETUP 101 INFORMATION 117 Operating the connected devices by remote control unit·····118 Operating AV devices 118 Registering preset codes 119 Operating devices 121 Specifying the zone used with the main remote control unit····123 Resetting the remote control - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 5
such as turning the unit ON/OFF, controlling the volume, and switching the source. z1 Download "Denon Remote App" from iTunes® App Store. The unit needs to be connected to a LAN and the iPhone/iPod touch needs to be connected to the same network by Wi-Fi (wireless LAN). Setup Wizard, providing easy - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 6
a TV connected with a single HDMI cable and any video source to be reproduced precisely with HD level of quality. High definition audio support The unit is equipped with a decoder which supports high-quality digital audio format for Blu-ray Disc players such as Dolby TrueHD, DTS-HD Master Audio, etc - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 7
and basic operation methods for this unit. F Connections vpage 5 F Settings vpage 19 F Playback (Basic operation) vpage 26 F Selecting a listening mode (SURROUND MODE) vpage 52 Advanced version Information Connection Playback Connection Playback Connection vpage 8, 10 - vpage 8, 11 vpage 28 - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 8
the Setup wizard, turn off the power supply of connected devices. • When making connections, also refer to the operating instructions of the other devices being connected. • Be sure to connect the left and right channels properly (left with left, right with right). • Do not bundle power cords - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 9
The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60 formats. • The resolution of the video signal output from the HDMI connector of this unit is set in "Resolution" (vpage 90) in the menu (vpage 136). • Resolutions of HDMI-compatible TVs can be checked at - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 10
Channel in HDMI 1.4a enables a TV, via a single HDMI cable, to send audio data "upstream" to this unit. NOTE • To enable the ARC function, set "HDMI Control" - "Control" to "ON" (vpage 106). • When connecting a TV that does not support the ARC function, a separate connection using an audio cable is - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 11
and digital audio signals over a single HDMI cable. Blu-ray Digital Disc DVD Set-top video Game Game player player box recorder console 1 console 2 TV HDMI OUT HDMI OUT HDMI OUT HDMI OUT HDMI OUT HDMI OUT HDMI IN Digital camcorder HDMI OUT Connecting an HDMI-compatible device - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 12
HDMI Setup (vpage 106) Make settings for HDMI video/audio output. • Auto Lip Sync • HDMI Audio Out • HDMI Control NOTE The audio signal input from the HDMI input connector can be output as an output signal from the HDMI output connector by setting the HDMI audio output destination to TV. Audio - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 13
7) or refer to the instruction manual for your TV. Cables used for connections Video cable (sold separately) Video cable Component video cable Optical cable Audio cable (sold separately) TV VIDEO COMPONENT VIDEO IN Y PB PR VIDEO IN AUDIO OPTICAL OUT in Set as Necessary Set this to change the - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 14
Set this to change the digital input connector or component video input connector to which the input source is assigned. "Input Assign" (vpage 88) When you want to play back HD Audio (Dolby TrueHD, DTS-HD, Dolby Digital Plus, DTS Express) and Multichannel PCM with this unit, use an HDMI connection - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 15
Advanced version Connecting a set-top box (Satellite tuner/cable TV) • You can watch satellite or cable TV. • Select the connector to use and connect the device. • For instructions on HDMI connections, see "Connecting an HDMI-compatible device" (vpage 7). Cables used for connections Video cable - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 16
-ray Disc or DVD. • Select the connector to use and connect the device. • When recording analog audio, use the analog connection. • See "REC OUT mode" (vpage 72) for operating instructions. • For instructions on HDMI connections, see "Connecting an HDMI-compatible device" (vpage 7). Cables used for - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 17
OUT AUDIO AUDIO OUT LR LR Connecting a control dock for iPod • Connect a control dock for iPod to the unit to enjoy video and music stored on an iPod. • For a control dock for iPod, use ASD-1R or ASD-11R made by DENON (sold separately). • For instructions on the control dock for iPod settings - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 18
, check page 31. • DENON does not guarantee that all USB memory devices will operate or receive power. When using a portable USB connection type HDD of the kind to which an AC adapter can be connected to supply power, use the AC adapter. NOTE • USB memory devices will not work via a USB hub. • Do - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 19
the signal has noise interference, connect the ground terminal (GND) to reduce noise. • If you are unable to receive a good broadcast signal, we recommend installing an outdoor antenna. For details, inquire at the retail store where you purchased the unit. in Set as Necessary Set this to change the - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 20
from a computer using the Web control function. • You can update by downloading the latest firmware from the DENON website. For more information, on the menu, select "Firmware Update" (vpage 115). • See "Network Setup" on the menu (vpage 108) for more information on network setting. Cables used for - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 21
. w Turn off the power of this unit from the external controller. e Check that the unit is in the standby mode. in Set as Necessary Set to change the conditions for linked operation via the TRIGGER OUT jack. "Trigger Out" (vpage 114) NOTE • Use the monaural mini-plug cable for connecting TRIGGER - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 22
settings for your speakers, and "Network Setup", which allows you to connect this unit to a home network (LAN). This unit lets you play via your home network Dynamic Volume® functions become active (vpage 98). • To set up the speakers manually, use "Speaker Setup" (vpage 102) on the menu. NOTE • Make - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 23
(vpage 104) before Audyssey® Auto Setup. 3 Set up the remote control unit nn Set up the zone mode Press ZONE SELECT to switch the zone mode to J (MAIN ZONE). The J indicator lights. Press ZONE SELECT nn Set up the operation mode Press AMP to set the remote control unit to AMPoperation mode. If - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 24
Auto Setup) 4 Connect the setup microphone to the SETUP MIC jack of this unit. When the setup microphone is connected, the following screen is displayed. AUDYSSEY AUTO SETUP STEP1 Preparation 1 2 3 4 5 6 Connect the speakers and place them according to the recommendations in the manual. Set - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 25
3 Measurement (2nd - 8th) STEP 4 Calculation Set up speakers (Audyssey® Auto Setup) • In STEP 3, you will perform measurements at The time required for this analysis depends on the number of speakers connected. The more connected speakers there are, the longer it takes to perform analysis. vSee - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 26
off the power. 15 Unplug the setup microphone from the unit's SETUP MIC jack. 16 Set Audyssey Dynamic Volume®. AUDYSSEY AUTO SETUP Finish Storing complete. Auto Setup is now finished. Please unplug microphone. Turn on Dynamic Volume? 1 2 3 4 5 6 Yes No Exit Turn Dynamic Volume off and exit Auto - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 27
possible that the speakers are not connected properly. Turn this unit off, check the speaker connections and repeat the measurement process from the beginning. • Be sure to turn off the power before checking speaker connections. Examples AUDYSSEY AUTO SETUP Caution! No microphone or speaker Error - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 28
Check Making the network settings (Network Setup) This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and still image (JPEG) files stored on a computer. 1 Connect the Ethernet cable (vpage 17 "Connecting to a home network (LAN)"). 2 Turn on this - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 29
Before starting playback, make the connections between the different devices and the settings on the unit. NOTE Also refer to the operating instructions of the connected devices when playing them. Selecting the input source Press the input source select button (BD, SAT/CBL, TV, NET/USB, DVD, V.AUX - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 30
control unit to the J (MAIN ZONE) mode when performing this operation (vpage 118 "Operating AV devices"). If the remote control unit is in K (ZONE2) mode, the "SOURCE SELECT" menu will not be displayed when SOURCE SELECT is pressed. SOURCE SELECT q Source BD w Recent Player e Video Network - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 31
player. 2 Press ON to turn on power to the unit. 3 Press CD to switch the input source to the CD player. 4 Play the device connected to this unit. 4 Play the device connected to this unit. Make the necessary settings on the player (language setting, subtitles setting, etc.) beforehand. Advanced - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 32
(vpage 14 "Connecting a control dock for iPod"). w Set the iPod in the DENON control dock for iPod. 2 Press ON to turn on power to the unit. 3 Press DOCK to switch the input source to "DOCK". • If "Browse mode" is selected in step 4, the following screen is displayed on a TV screen, depending - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 33
equipped with a video function is connected to a DENON ASD-11R control dock for iPod, image files TV Out" at the iPod's "Slide show Settings" or "Video Settings" must be set to "On" in order to display the iPod's photo data or videos on the monitor. For details, see the iPod's operating instructions - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 34
is not compatible with iPod shuffle). 1 Connect the iPod to the USB port (vpage 15 "Connecting an iPod or USB memory device to the USB port"). 2 Press ON to turn on power to the unit. 3 Press NET/USB to switch the input source to "NET/ USB". DENON:[AVR-2312CI] Favorites Internet Radio Media Server - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 35
Remote mode switching RETURN B Return 6 7 Manual search (Press and hold) (fast-reverse/fast-forward) 1 Playback / Pause 8 9 Auto search (cue) 3 Pause 2 Stop TV Z / X TV power on/standby (Default : SONY) TV INPUT Switch TV a control dock for iPod or an iPod (USB) is connected, the - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 36
select the station you want to hear. w To tune in manually (Manual tuning) Press MODE to turn off the display's "AUTO" indicator, then use TUNING d 92). If "Auto Preset" is performed after performing "Manual preset", the "Manual preset" settings will be overwritten. 1 Tune in the broadcast station - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 37
. nnDirect frequency tuning You can enter the receiving frequency directly to tune in. 1 Press the immediately preceding input is cancelled. 3 When setting is completed, press ENTER. The preset frequency is BAND MODE TUNING df 0 - 9 SHIFT MEMORY TV Z / X Function Preset channel selection Amp menu - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 38
by accessing an exclusive DENON Internet radio URL from a Web browser on a computer. • The function is managed for individual users, so you must provide your MAC or e-mail address. Exclusive URL: http://www.radiodenon.com • The radio station database service may be suspended without notice - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 39
Codec) 32/44.1/48/88.2/96 kHz - .flac Playing a network audio nnAbout Flickr Flickr is an online photograph sharing service that started in 2004. You can use the this unit to view photographs that have been made public by Flickr users. You do not need an account to use Flickr. To view photographs - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 40
the network environment, then turn on this unit's power (vpage 17 "Connecting to a home network (LAN)"). w If settings are required, make the "Network Connecting" V on the main unit is pressed, the same function as with the remote control unit can be obtained. • When INTERNET RADIO V is pressed, the - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 41
setting. The Internet radio station is now preset. Playing a network audio connects to the Internet and playback begins. Registering Internet radio stations to PRESET CHANNEL buttons • Up to three Internet radio stations can be registered to the PRESET 1 - 3 buttons on the remote control - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 42
, then press ENTER or p. This unit automatically connects to the Internet and playback begins. 00:14 radio station is cleared. Favorites [1/1] Playing a network audio nnInternet radio operation Operation buttons INTERNET RADIO V TV power on/standby (Default : SONY) TV INPUT Switch TV input - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 43
Prepare for playback. q Check the network environment, then turn on this unit's power (vpage 17 "Connecting to a home network (LAN)"). w If settings are required, make the "Network Connecting" (vpage 108). e Prepare the computer (vComputer's operating instructions). 2 Press SOURCE SELECT to display - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 44
on Flickr. nnViewing photographs shared by particular users 1 Prepare for playback. q Check the network environment, then turn on this unit's power (vpage 17 "Connecting to a home network (LAN)"). w If settings are required, make the "Network Connecting" (vpage 108). 2 Press SOURCE SELECT to display - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 45
Basic version Advanced version Playing a network audio nnFlickr operation Operation buttons Function INTERNET RADIO V Last played Preset channel selection SHIFT Preset channel block selection TV Z / X TV power on/standby (Default : SONY) TV INPUT Switch TV input (Default : SONY) • Slide - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 46
Advanced version Listening to Napster 1 Prepare for playback. q Check the network environment, then turn on this unit's power (vpage 17 "Connecting to a home network (LAN)"). w If settings are required, make the "Network Connecting" (vpage 108). 2 Press SOURCE SELECT to display the "SOURCE SELECT - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 47
Basic version Advanced version Playing a network audio nnNapster operation Operation buttons Function INTERNET RADIO V Last Preset channel selection SHIFT Preset channel block selection TV Z / X TV power on/standby (Default : SONY) TV INPUT Switch TV input (Default : SONY) • Repeat - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 48
Advanced version Listening to Pandora 1 Prepare for playback. q Check the network environment, then turn on this unit's power (vpage 17 "Connecting to a home network (LAN)"). w If settings are required, make the "Network Connecting" (vpage 108). 2 Press SOURCE SELECT to display the "SOURCE SELECT - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 49
station is created (e.g. D&M2 Radio). My Station [4/4] New Station Quick Mix D&M1 Radio D&M2 Radio Exit RETURN Sign out Playing a network audio nnListening to a created radio station Listening to a created radio station (e.g. D&M2 Radio) By specifying your favorite track or artist name, music - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 50
ENTER. nnPandora operation Operation buttons MENU uio p ENTER (Press and release) ENTER (Press and hold) SEARCH RETURN B 1 9 3 2 TV Z / X TV INPUT Playing a network audio Function Amp menu Cursor operation / Auto search (cue, i) Enter / Pause Stop Page searchz Return Playback Auto search (cue - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 51
network environment, then turn on this unit's power (vpage 17 "Connecting to a home network (LAN)"). w If settings are required, make the "Network Connecting then press ENTER. nnSelect the search mode Rhapsody [1/4] Rhapsody Music Guide Search Rhapsody Channels My Library e r q w q Search - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 52
audio with extended bass or treble reproduction, we recommend playback in RESTORER mode (vpage 99). The default setting album name. Playing a network audio nnRhapsody operation Operation buttons Function block selection TV Z / X TV power on/standby (Default : SONY) TV INPUT Switch TV input ( - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 53
devices A USB memory device can be connected to the USB port of this unit to play music and still plays back music and image files from the network You can playback music and image files at settings. WMA (Windows Media Audio) MP3 (MPEG-1 Audio Layer-3) WAV MPEG-4 AAC FLAC (Free Lossless Audio - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 54
Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port (vpage 15 "Connecting an iPod or USB memory device to the USB port"). 2 Press NET/USB to switch the input source to "NET/USB". DENON:[AVR-2312CI] Favorites Internet Radio Media Server USB Flickr Napster - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 55
for enjoying movies and TV programs. Switches to the Direct mode. In Direct mode, the audio is played back exactly how it was HD HI RES DTS-HD MSTR DTS-HD / DTS Express DTS Express DTS-HD + NEO:6 DTS-HD + PLgx Cinema DTS-HD + PLgz MULTI CH IN PCM multichannel MULTI CH IN 7.1 MULTI IN + Dolby - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 56
audio format or number of channels of the input signal. For details, see "Types of input signals, and corresponding surround modes" (vpage 133). Views on the TV screen or display q w q Shows a decoder to be used. • A DOLBY DIGITAL Plus decoder is displayed as "DOLBY D +". w Shows a decoder that - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 57
Config." - "Front Height" is not set to "None". Selecting a listening mode DTS listening mode Listening mode type DTS NEO:6 DTS SURROUND DTS ES DSCRT6.1z DTS ES MTRX6.1z DTS 96/24 DTS-HD DTS Express Description This mode can be selected when a DTS NEO:6 decoder is used to play back 2-channel - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 58
DENON playback in higher sound quality than in "Direct playback" mode. Turn the display of the amplifier off to stop the analogue video circuit 99) • Dynamic EQ® (vpage 98) NOTE • Video signals are only output when HDMI signals are played in the PURE DIRECT mode. • When in the PURE DIRECT mode, the - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 59
you make better use of this unit. F Speaker installation/connection (Advanced connection) vpage 57 F Playback (Advanced operation) vpage 68 F Playback in ZONE2 (Separate room) vpage 79 F How to make detailed settings vpage 82 F Operating the connected devices by remote control unit vpage 118 56 - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 60
WIZARD". Use Audyssey® Auto Setup function of this unit to automatically detect the number of connected speakers and perform optimal settings for the speakers to be used. Procedure for speaker settings Install Connect (vpage 59) Set up speakers (vpage 65) Install This unit is compatible with Dolby - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 61
Basic version Advanced version When 7.1ch (Front height speaker) installed FHL FHR FL SW z2 z1 FR C z3 SL SR Listening position z1 22˚ - 30˚ z2 22˚ - 45˚ z3 90˚ - 110˚ GSpeaker abbreviationsH FL Front speaker (L) SB Surround back speaker FR Front speaker (R) FHL Front height speaker - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 62
• Never touch the speaker terminals while the power supply is connected. Doing so could result in electric shock (When the Setup wizard is running, follow the instructions in the Setup wizard screen for making connections.). • Use speakers with the speaker impedances shown below. Speaker terminals - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 63
speakers. If you connect the surround back and front height speakers before you start playback, the audio is played back by automatically switching the speakers in accordance with the surround mode or input signals. To perform 7.1-channel playback using the front height speaker, set "Amp Assign" to - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 64
up "Amp Assign"" (vpage 65). Also use the "Speaker Config." setting (vpage 103) to set "Surr.Back" to "1spkr". NOTE • For speaker cable connections, see C page 6 "Connecting the speakers". • For speaker impedance , see page 59. Connect Advanced version Information FL SW FR C SL SR SBL 61 - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 65
this case, set "Amp Assign" to "Front B" in steps 3 and 4 for "Set up "Amp Assign"" (vpage 65). 2.1-channel connection Connect Advanced version Information playback (vpage 105 "Front Speaker Setup"). NOTE • For speaker cable connections, see C page 6 "Connecting the speakers". • For speaker - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 66
you can enjoy playback with higher-quality sound. In this case, set "Amp Assign" to "Bi-AMP" in steps 3 and 4 for "Set up "Amp Assign"" (vpage 65). For surround playback of a multichannel source, if you connect the center speaker, surround speakers and subwoofers, 5.1-channel playback is available - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 67
in accordance with the surround mode. To set the speakers for automatic switching during playback, select "Amp Assign" and set to "2CH" using steps 3 and 4 of "Set up "Amp Assign"" (vpage 65). NOTE • For speaker cable connections, see C page 6 "Connecting the speakers". • For speaker impedance , see - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 68
66 "Set up "Channel Select""). 1 Set up the remote control unit nn Set up the zone mode Press ZONE SELECT to switch the zone mode to J (MAIN ZONE). The J indicator lights. 2 Connect the setup microphone. Press ZONE SELECT nn Set up the operation mode Press AMP to set the remote control unit - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 69
B to exit the "Amp Assign" setting. 6 Set up "Channel Select" Use ui to select "Channel Select", and then press ENTER. AUDYSSEY AUTO SETUP STEP1 Preparation 1 2 3 4 5 6 Connect the speakers and place them according to the recommendations in the manual, Set the following items If necessary - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 70
measured. Measure Set for measuring a subwoofer. Skip Set for no measuring of a subwoofer. Set up speakers NOTE After performing Audyssey® Auto Setup, do not change the speaker connections or subwoofer volume. In event of a change, perform Audyssey® Auto Setup again. 10 Use o p to set whether or - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 71
(vpage 76) nn Web control function (vpage 77) nn Various memory functions (vpage 78) Convenient functions HDMI control function If you connect the unit and an HDMI control function compatible TV or player with an HDMI cable and then enable the HDMI control function setting on each device, the - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 72
with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. • Some functions may not operate depending on the connected TV or player. Check the owner's manual of each device for details beforehand. • When "Power Off Control" on the menu is set to "OFF - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 73
to switch the zone mode to J (MAIN ZONE). The J indicator lights. 2 Press AMP to set the remote control unit to AMP-operation mode. 3 Press CH LEVEL. CHANNEL LEVEL Front L Front R -8.0dB -12.0dB Subwoofer 0.0dB Subwoofer ON 5 Use o p to adjust the volume. • You can directly turn "OFF" the - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 74
"Quick Select Name" (vpage 114). • The Quick Select function can be set separately for the different zones (vpage 81 "Quick select function"). • If QUICK SELECT on the main unit is pressed, the same function as with the remote control unit can be obtained. NOTE Input sources stored with the quick - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 75
the audio/video recording connectors (DVR outputs), you can record the audio or remote control unit in REC OUT mode while it is in the operating mode for ZONE2 are as follows: • ZONE/DEVICE power button • Muting button • Master volume control instructions, refer to the respective device's operating - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 76
Remote appz for iPhone, iPod touch and iPad to control iTunes from any room in your home. zzAvailable as a free download from the App Store. nnSetting procedure 1 Install iTunes 10, or later, on a Mac or Windows PC that is connected to the same network as this unit. 2 Turn this unit ON. Set "Network - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 77
network audio (Internet radio, Media server or iPod DIRECT) can be played on multiple DENON products equipped with the Party Mode function and connected in a network uio p and ENTER to select the desired track. DENON:[AVR-2312CI] Favorites Internet Radio Media Server [1/3] PARTY ATTENDEE The - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 78
ENTER. When the device control mode is started, the network menu of the connected device is displayed on this unit's television screen. DENON:[AVR-2312CI] Model Power Select Source Volume Level AVR-2312CI ON NET/USB -20.0dB Device Control Start device control Enter RETURN Return NOTE • If - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 79
110) is set to "ON", the power automatically turns on. NOTE When operations related to browsing or playback (play, stop, pause, track search) are performed on this unit while operating the media controller, the connection to the network is disconnected. The network connection is also disconnected - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 80
Advanced version Web control function You can operate this unit using a browser. 1 Switch the "Network Standby" setting to "ON". (vpage 110). 2 Check the IP address of this unit with "Network Info." (vpage 111). NETWORK INFO. Friendly Name DHCP IP Address MAC Address DENON:[AVR-2312CI] OFF 192 - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 81
"Set". GExample 3H Web configuration screen Web Controller Config. Q8 Top Menu Link Setup ON OFF Q9 Back Top Menu GExample 4H Net Audio operating screen ZONE CONTROL > QUICK SELECT > CHANNEL LEVEL > NET AUDIO / USB > iPod Dock > iPod Direct > NET AUDIO/USB(MAIN ZONE) Back DENON:[AVR - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 82
assignment function. nnConnecting and setting the speakers "Amp Assign" setting (vpage 102) and audio signals output Connecting the speakers ZONE2 w Zone playback by audio output (PRE OUT) nnAudio connections (ZONE2) The audio signals of this unit's ZONE2 audio output terminals are output to - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 83
Basic version Advanced version Playback 1 Press ZONE SELECT to switch the zone mode to K (ZONE2). 2 Press AMP to set the remote control unit to AMP-operation mode. 3 Press ZONE/DEVICE Z to turn on the ZONE2 power. The indicator on the display lights. • Also press input source select button - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 84
pressed, the same function as with the remote control unit can be obtained. To confirm the countdown time before putting the unit to sleep Press SLEEP. "Z2 Sleep : zmin" appears on the display. zz Countdown time To cancel the sleep timer Press SLEEP to set "OFF". The sleep timer is also canceled - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 85
connection, and setup procedures to prepare the unit for operation following guidance. Sets the speaker size and distance, the channel level, etc. Makes settings for HDMI video/audio output. Makes settings for audio playback. Makes network settings. Makes settings for audio playback in a multi-zone - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 86
Setup screen (with illustration) q AUDIO/VIDEO ADJUST e w Audio Adjust r Picture Adjust i AUDYSSEY AUTO SETUP STEP1 Preparation 1 2 3 4 5 6 Q0 Connect the speakers and place them according o to the recommendations in the manual, Set Q3 Guide text for the currently selected setup item - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 87
ui to move to the item you want to set. Advanced version Information Display when changing settings Display when resetting BD Adjust various audio and video parameters INPUT ASSIGN [1/2] Default BD DVD TV SAT/CBL DVR GAME1 GAME2 HDMI DIGITAL q HDMI1 None HDMI2 COAX1 None OPT1 HDMI3 - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 88
Account" (vpage 111), "Zone Rename" (vpage 114), "Quick Select Name" (vpage 114) and character input for the network functions. For inputting characters, q Using the keyboard screen • Operating with the remote control unit. • Select a character on the TV screen to input characters. ABCDE F GH I J - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 89
to register the input source name. DENON Using the cursor buttons Inputting characters 1 Display the screen for inputting characters (vpage 82 "Menu map"). 2 Press SEARCH while a keyboard screen is displayed. A 10 Key screen is displayed. 3 Use o p to set the cursor to the character you want - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 90
to change the settings to use the unit. Make settings when needed. Menu operation 1 Press ZONE SELECT to switch the zone mode to J (MAIN ZONE). The J indicator lights. 2 Press AMP to set the remote control unit to AMP-operation mode. 3 Press MENU. The menu is displayed on the TV screen. 4 Use ui - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 91
• The audio signals input from the analog and digital connectors are not output to the monitor. • When a control dock for iPod is connected, signals cannot be assigned to the HDMI connectors. • When "HDMI Control" - "Control" (vpage 106) is set to "ON", HDMI input connector cannot be assigned to "TV - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 92
is displayed as "- - -". • When a control dock for iPod is connected, signals cannot be assigned to the component video connectors. Yes : Reset to the defaults. No : Do not reset to the defaults. If you select "Default" and press ENTER, the message "Return all settings to the default?" is displayed - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 93
Setting items Setting details Resolution Set the output resolution. You can set "Resolution" separately for HDMI output of the analog video input and HDMI input. BD z DVD TV z SAT/CBL DVR GAME1 z GAME2 z Auto : The number of pixels the TV connected to the HDMI output connector supports - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 94
"HDMI Control" - "Control" is set to "ON" and a TV compatible with the ARC is connected via the HDMI MONITOR connectors, the input mode whose input source is "TV" is fixed to ARC. Decode Mode Auto : Detect type of digital input signal and decode and play automatically. Set the audio decode mode - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 95
DOCK Shuffle Make settings for shuffle Setting items Repeat Make settings for repeat mode. Media Server USB/iPod Napster Rhapsody Random Make random mode settings. Setting settings for playing back still picture images. Setting items Slide Show Make slide show settings. Setting Interval Set the - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 96
, see page 85. TUNER Default The changed preset name is returned to the default setting. Yes : Reset to the defaults. No : Do not reset to the defaults. When you select "Default" and press ENTER, the "Return all settings to the default?" prompt is displayed. Select either "Yes" or "No", and press - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 97
sound and video quality can be adjusted. Menu operation 1 Press ZONE SELECT to switch the zone mode to J (MAIN ZONE). The J indicator lights. 2 Press AMP to set the remote control unit to AMP-operation mode. 3 Press MENU. The menu is displayed on the TV screen. 4 Use ui to select the menu to be - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 98
: Automatic dynamic range compression on/off control according to source. This can be set in the Dolby TrueHD mode. Low / Middle / High : These set the compression level. OFF : Dynamic range compression always off. AUDIO/VIDEO ADJUST Setting items D.COMP Compress dynamic range (difference between - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 99
version Setting items Setting details Height Gain Control the set if the HD Audio source being played includes a front height channel. In this case, the Front height channel is played back without decoding in PLgz mode, using the input signal. ON : Set. OFF : Do not set. [Example] Playing Dolby - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 100
: Do not reset to the defaults. When you select "Default" and press ENTER, the "Return all settings to the default?" prompt is displayed. Select either "Yes" or "No", and press ENTER. AUDIO/VIDEO ADJUST nnTone Adjust the tonal quality of the sound. Setting items Setting details Tone Control ON - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 101
25) to return to the settings after Audyssey® Auto Setup was run. • When HD Audio for which the sampling frequency exceeds 96 kHz is played back, the "Audyssey Settings" cannot be set. Setting items MultEQ® XT MultEQ® XT corrects both time and frequency response problems in the listening area based - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 102
underlined. While viewing video, manually adjust the time to delay audio output. 0ms - 200ms Setting details • This item can be set within the range of 0 to 100 ms when "Auto Lip Sync" is set to "ON" and when a TV compatible with Auto Lip Sync is connected. • Store "Audio Delay" for each input - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 103
than the ones above, this item can be set when "Video Select" is selected. In this case, the original input source settings are called out. • Can be set when the "Video Convert" setting (vpage 90) is "ON". • "BD", "TV", "GAME1" or "GAME2" can be set when "HDMI" (vpage 88) or "COMP" (vpage 89) has - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 104
the menu is displayed. The menu display disappears. Items that can be set with the "SYSTEM SETUP" procedure Speaker Setup (vpage 102) HDMI Setup (vpage 106) Audio Setup (vpage 107) Network Setup (vpage 108) ZONE2 Setup (vpage 112) Option Setup (vpage 113) Language (vpage 116) Information BD 101 - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 105
Basic version Advanced version Speaker Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey® Auto Setup. • If you change the speaker settings after performing Audyssey® Auto Setup, it will not be possible to select Audyssey - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 106
Select when the front height speakers are not connected. NOTE When "Amp Assign" setting (vpage 102) is "F.Height", you can make the "Front Height" setting. Setting items Bass Setting Set subwoofer and LFE signal range playback. SYSTEM SETUP Setting details Subwoofer Mode : Select low range signals - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 107
set to "None" in "Speaker Config." (vpage 102) are not displayed. SYSTEM SETUP Setting items Setting details Channel Level Test Tone Start : Output test tone. Set "Channel Level" settings are returned to the default settings. • Yes : Reset to the defaults. • No : Do not reset to the defaults. - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 108
to "Small" at "Speaker Config." can be set. If the speakers are set to "Large", "Full Band" is displayed and the setting cannot be made. • If set to "LFE+Main", this setting can be made regardless of the speaker size. Front Speaker Setup Set the front speakers to use for every surround mode. NOTE - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 109
work when the power to the device is off. Either turn power on or set to standby. • The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. • If the "HDMI Control" - "Control - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 110
when Audyssey® recalled in the Quick Select Auto Setup is performed. function. Manual : Set when not using the "Manual" equalizer. • Used : Use. • Not Used : Do not use. • This setting can be set made "2ch Direct/Stereo" - "Subwoofer" is set to "Yes". • If the "2ch Direct/Stereo" - "Front - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 111
. 000. 000. 000 000. 000. 000. 000 r Set IP address manually RETURN Cancel e q On the menu, select "Network Connecting" - "Detail" and press ENTER. w Use uio p to set "DHCP" to "OFF", then press ENTER. The DHCP function is disabled. SYSTEM SETUP Setting details e Use uio p or 0 - 9 to input the - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 112
proxy server RETURN Cancel q On the menu, select "Network Connecting" - "Detail" and press ENTER. w Use ui to set "Proxy" and press ENTER. SYSTEM SETUP Setting details e NETWORK CONNECTING Proxy ON Proxy r Address Address 000. 000. 000. 000 t Port 00000 Exit uy Proxy server is used - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 113
of this unit displayed on the network. Up to 63 characters can be input. The default Friendly Name on first use is "DENON:[AVR-2312CI]". • For character input, see page 85. Default : Restores Friendly Name, which you had changed, to the default setting. • Yes : Reset to the defaults. • No : Do not - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 114
to Rhapsody"). Napster Account Set or change Username and Password (vpage 43 "Listening to Napster"). Username / Password / Clear • For character input, see page 85. Network Information Friendly Name / DHCP=ON or OFF / IP Address / MAC Address Display network information. • When you press - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 115
Basic version Advanced version ZONE2 Setup Default settings are underlined. Set the audio to play back with multi-zone (ZONE2). • "ZONE2" is displayed when "ZONE2" is selected with "Amp Assign" (vpage 102). Setting items Setting details Bass -10dB - +10dB (0dB) Adjust low frequency range ( - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 116
. NOTE When a format other than the video format of the connected TV is set, the picture will not be displayed properly. Text : Display the details of operation when switching surround mode, input mode, etc. • ON : Turn display on. • OFF : Turn display off. vSee overleaf Information BD 113 - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 117
30 seconds after operation. • 10s : Show display for 10 seconds after operation. • OFF : Turn display off. Remote Setup Guide Search a preset code to See "Registering preset codes" (vpage 119). register in the remote control unit. Quick Select Name Change the "Quick Select" display title to one - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 118
to be notified, set "Update Notification" (vpage 111) and "Upgrade Notification" (vpage 111) to "OFF". Setting items Setting details Maintenance Mode NOTE Use when receiving maintenance from a DENON Only use this function if so instructed by a DENON serviceperson or service engineer or custom - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 119
for display on the menu screen. English / Español Setting details SYSTEM SETUP Default settings are underlined. "Language" can also be set by the following procedure. However, the menu screen is not displayed. 1. Press and hold the main unit's PRESET 1 and PRESET 3 for at least 3 seconds - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 120
receiver settings, input signals, etc. Items Status Show information about current settings. Audio Input Signal Show information about audio input signals. Setting details nn MAIN ZONE This item shows information about settings for MAIN ZONE Dolby HDMI Information Show information about HDMI input - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 121
AMP to switch the remote control unit to the AMP-operation mode to perform the following operations: • For menu operation by pressing MENU • For setting the channel level of the unit by pressing CH LEVEL • For turning power in each zone on or off by pressing ZONE/DEVICE Z or ZONE/DEVICE X. 3 Operate - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 122
set the remote control unit to AMPoperation mode. 3 Press MENU. The menu is displayed on the TV screen. 4 Use ui to select "SYSTEM SETUP" - "Option Setup" - "Remote Setup Guide" and then press ENTER or p. OPTION SETUP Volume Control Source Delete GUI Remote Setup Guide Quick Select Name Zone Rename - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 123
unit supplied with the device to be used. 8 The procedures for registering remote control codes and remote control preset registration are displayed. REMOTE SETUP GUIDE Device Brand Code [1/3] : DVD : DENON : 30490 1. Press [INPUT SOURCE]. 2. Press and hold [DEVICE ON ( l )] for 3 seconds - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 124
. • For details, refer to the device's operating instructions. nnBlu-ray Disc player / HD-DVD player / DVD player operation Operation buttons CH +, - MENU TOP MENU uio p ENTER SETUP RETURN B 6 7 1 8 9 3 2 0 - 9, +10 TV Z / X TV INPUT ZONE/DEVICE Z ZONE/DEVICE X Function Switch channels (up/down - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 125
for satellite (SAT) / Cable (CBL) / IP TV operation Operation buttons CH +, - MENU uio p ENTER SETUP RETURN B 6 7 1 8 9 3 2 0 - 9, +10 TV Z / X TV INPUT ZONE/DEVICE Z ZONE/DEVICE X Function Switch channels (up/down) Menu Cursor operation Enter Guide Return Manual search (fast-reverse/fast-forward - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 126
, only the set zone can be operated with the remote control unit. 1 Press and hold ZONE/DEVICE Z for at least 3 seconds. The zone mode indicator flashes twice. 2 Press ZONE SELECT. The zone mode indicator flashes twice. Resetting the remote control unit Settings for the remote control unit are - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 127
, we list various information related to this unit. Please refer to this information as needed. F Part names and functions vpage 125 F Other information vpage 130 F Troubleshooting vpage 140 F Specifications vpage 145 F Index vpage 146 124 - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 128
audio will no longer be output from the connected port 15) i HDMI connector 8) o V.AUX INPUT connectors 14) Remove the cap covering the connectors when you want to use them. Q0 SETUP MIC jack 21, 65) Q1 MASTER VOLUME control knob 27) Q2 Master volume indicator Q3 Display 126) Q4 Remote control - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 129
(vpage 99). Q3 Multi-zone indicators This lights up when ZONE2 (separate room) power is turned on (vpage 80). Q4 Input mode indicators Set the audio input modes for the different input sources (vpage 91). Q5 HDMI indicator This lights when playing using HDMI connections. Q6 Tuner reception mode - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 130
61, 62, 63, 64) y AC inlet (AC IN C 5) u COMPONENT VIDEO connectors 10, 11, 12) i HDMI connectors C 3, 8) o Digital audio connectors 10, 11, 12, 13) Q0 ETHERNET connector 17) Q1 REMOTE CONTROL jacks 18) Q2 DOCK CONTROL jack 14) Q3 S-VIDEO/VIDEO connectors 10, 11, 12, 13, 14) Q4 TRIGGER OUT - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 131
Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). Q9 q W0 w e W1 r t y u i W2 o Q0 W3 Q1 Q2 W4 W5 Q3 Q4 Q6 W6 Q5 Q7 W7 W8 Q8 W9 q ZONE SELECT button 80, 118) w Zone TV operation buttons (TV Z / X / INPUT 121, 122) Q9 Remote control - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 132
ft/7 m 30° 30° e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control unit. • Replace the batteries with new ones if the set does not operate even when the remote control unit is operated close to the unit. (The supplied batteries are only for verifying operation - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 133
HD Master Audio, and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. "Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect iPhone, may affect wireless performance. AirPlay, the AirPlay logo, iPhone, - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 134
DOLBY PRO LOGIC gz S DOLBY PRO LOGIC gx S DOLBY PRO LOGIC g S DTS NEO:6 S DOLBY DIGITAL S DOLBY DIGITAL Plus S DOLBY TrueHD S DTS SURROUND S DTS 96/24 S DTS-HD "Height" mode setting is available for "Surround Parameters" - "Mode" (vpage 95). z6 For HD Audio whose sampling frequency - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 135
. z15 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played. z16 This item cannot be set when "Dynamic EQ®" (vpage 98) is set to "ON". z17 In this surround mode, bass is +6 dB, and treble is +4 dB. (Default) z18 For HD Audio whose sampling frequency of an input signal - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 136
PRO LOGIC gx GAME DOLBY PRO LOGIC gz DOLBY PRO LOGIC g CINEMA DOLBY PRO LOGIC g MUSIC DOLBY PRO LOGIC g GAME DOLBY PRO LOGIC NOTE ANALOG PCM PCM PCM (multi ch) (2ch) z1z3 z1z3 z2z3 z1z3 z4 z1z3 S S S S DTS-HD DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 137
DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) Input signal types and formats DTS DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY DOLBY DIGITAL DOLBY TrueHD DOLBY DIGITAL Plus DOLBY DIGITAL EX (With Flag) DOLBY DIGITAL EX (With no Flag) DOLBY - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 138
VIDEO A S A S A S A S A S A S A S A S S A S A S A S A S A S A S A S MAIN ZONE MONITOR OUT Output connector HDMI COMPONENT A S A S S S S A A S A S S A S VIDEO A S S A S - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 139
set to "Auto", and a television that supports 1080p 24Hz video signals is connected. • Video/component video output is output at the same resolution as the input video signal resolution. • The 3D, Computer resolution, "x.v.Color", sYCC601 color, Adobe RGB color or Adobe YCC601 color input to HDMI - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 140
for both time and frequency response problems in the listening area and also performs a fully automated surround system setup. Auto Lip Sync If you connect the unit to a TV that supports the Auto Lip Sync function, it can automatically correct delay between the audio and video. D Deep Color This - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 141
to prevent content from being copied without authorization. HDMI This is an abbreviation of High-Definition Multimedia Interface, which is an AV digital interface that can be connected to a TV or amplifier. Video signal and audio signal can be connected using 1 cable. I iTunes iTunes is the name of - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 142
has been compromised, owners of Secure Content (Secure Content Owners) may request that other files. WMA (Windows Media Audio) This is audio compression technology developed by Microsoft Corporation the file may not work properly. Explanation of ZONE) (ZONE2 playback). The room for ZONE2 - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 143
contact the DENON service adviser. • Reset the microprocessor. Page C 5 138 114 - - C 6 C 6, 59 - 144 GHDMIH Symptom Cause/Solution No audio is output with HDMI connection. • Check the connection of the HDMI connectors. • When outputting HDMI audio from the speakers, set "HDMI Audio Out" on - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 144
"Decode Mode" on the menu to "Auto" or "DTS". • Make HDMI connections. • Check that "Speaker Config." - "Center" or "Surround" is set to other than "None". If the speaker system is 2.0/2.1ch, this surround mode cannot be selected. • When headphones are used, Dolby PLg or DTS NEO:6 cannot be selected - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 145
• Computer's power is not turned on. Turn on the power. • Server is not running. Launch the server. • Set's IP address is wrong. Check the set's IP address. iPod cannot be played. • Some iPods do not support being used connected directly to the USB port. Cannot connect to preset or favorite radio - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 146
iPhone/iPod touch/iPad to the same network as this unit. • iTunes or the iPhone/iPod touch/iPad do not have firmware that supports AirPlay installed. Update to the latest firmware. • The volume in iTunes or on the iPhone/iPod touch/iPad is set to the minimum setting. Adjust the volume to the optimum - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 147
the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. ON/STANDBY PRESET CHANNEL 2 PRESET CHANNEL 3 1 Turn off the power using ON/STANDBY. 2 Press ON/STANDBY while simultaneously pressing PRESET CHANNEL - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 148
Basic version Advanced version Specifications nn Audio section • Power amplifier Rated output: Output connectors: • Analog Input sensitivity/Input impedance: Frequency level and impedance: Frequency response: nn Tuner section Receiving Range: Usable Sensitivity: 50 dB Quieting Sensitivity: S/N - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 149
13 DVD player 8, 11 External control device 18 Game console 8 HDMI 7 Home network (LAN 17 iPod (USB 15 Satellite tuner 12 Set-top box 8, 12 Speaker 59 TV 8, 10 USB memory device 15 Content Type 7 Contrast 100 Crossover Freq 105 Curve Copy 99 vvD D.COMP 95 Decode Mode 91 Deep Color - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 150
113 Add New Feature 115 Dimmer 114 Firmware Update 115 GUI 113 Maintenance Mode 115 Quick Select Name 114 Remote Setup Guide 114 Setup Lock 114 Source Delete 113 Trigger Out 114 Volume Control 113 Zone Rename 114 vvP Pandora 36, 45 Panorama 95 Parameter Check 25 Party mode 74 Picture - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 151
148 17 1/8 (435.0) Weight : 24 lbs 4 oz (11.0 kg) 5/8 (16.0) 5 15/16 (151.0) 6 37/64 (167.0) 27/32 (21.5) Information Advanced version 13 21/64 (338.5) 15 3/64 (382.0) 55/64 (22.0) Basic version Dimensions Unit : in. (mm) - Denon AVR-2312CI | AVR-2312CI Owners Manual - Page 152
V00 www.denon.com D&M Holdings Inc. 3520 10042 009D
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
 |
 |
INTEGRATED NETWORK AV RECEIVER
AVR-2312CI
Owner’s Manual