Denon DRM-555 Operating Instructions - Page 13

TAPE COUNTER AND MEMORY STOP ENGLISH REMOTE SENSOR dB -40 -30 -20 -10 -5 -3 -1 L R 0 +1 +3 +5 +10 MPX SYNC MEMO DOLBY NR B OFF C RESET COUNTER MEMORY MPX REV.MODE PLAY 2 STOP 3 REC PAUSE DIRECTION REC/REC MUTE CD SYNCHRO REC PHONES PHONE LEVEL MIN MAX - 1) Operation of the Tape Counter (1) Press the Counter Reset button (RESET) to reset the counter to 2) By using the Play, Fast Forward or Fast Rewind functions, the reading of the counter will change to indicate index position. • During recording and playback operations, the counter is useful for noting the location of existing programs or positions where recording is to be started. • The reading of this counter does not correspond with that of any other deck. 2) MEMORY STOP Operation (1) During recording or playback, the Memory Stop feature can be used to locate a particular point on the tape. Press the Counter Reset button (RESET) at the desired point. (2) Then press the Counter Memory button (MEMORY), the MEMO indicator lights. (3) When the Fast Rewind button ( 00 ) is pressed during forward tape travel ( ), or the Fast Forward button ( 11 ) is pressed during reverse tape travel ( ), the tape is rapidly rewound (or advanced) until the counter indication of is reached. • The Memory Stop feature will rewind or forward the tape to within -5 counts in the forward ( ) direction (from to " ") and to within +5 counts in the reverse ( ) direction (from to After this, several seconds are required for corrective operations. Caution: If the memory stop operation is performed after repeated fast-forwarding or rewinding, the tape may not stop at the proper position. 13