Denon DRM-555 Operating Instructions - Page 8

ENGLISH AUTOMATIC TAPE SELECTION This Stereo Cassette Deck contains an automatic tape selector which automatically selects the optimum bias and equalization for the tape in use. This is accomplished by detection of the tape type detections holes in the cassette housing. • If a tape without tape type detection holes is used, the deck will be set for normal tapes. PLAYBACK • Switch on your amplifier or receiver. • Set the Tape Monitor switch on your amplifier or receiver to the TAPE position. • The numbers in the illustration below depict the order in which operation steps are carried out. Detection holes for metal tape Detection holes for chrome tape PRECISION AUDIO COMPONENT/CASSETTE TAPE DECK DRM-555 EJECT 5 HIGH SPEED DUBBING SYSTEM TIMER REC OFF PLAY. ¢ON £OFF AUTO REVERSE dB -40 -30 -20 -10 -5 -3 -1 L R 0 +1 +3 +5 +10 ,¤,, REMOTE SENSOR DOLBY NR B OFF C INPUT LEVEL 5 4 6 RESET 3 7 COUNTER MEMORY 2 8 MPX REV.MODE 1 0 9 10 PLAY 2 STOP 3 REC PAUSE DIRECTION REC/REC MUTE CD SYNCHRO REC PHONES PHONE LEVEL MIN MAX BIAS FINE BALANCE - + LEFT RIGHT q Press the Power Operation switch to the ¢ ON position. w Press the Eject button (EJECT 5 ) to open the cassette compartment cover. e Load the cassette tape and close the cassette compartment cover. r When listening to a tape that has been recorded with Dolby noise reduction, set the Dolby NR switch (DOLBY NR) to match the system used at the time of recording. DOLBY NR B OFF C t Press the Direction button ( 0 1 ) to select the direction of tape transport. Transport Direction Forward Reverse Indicator 8