Denon DVD 3800BDCI Owners Manual - English - Page 15

ENGLISH Connections • If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as Multi LPCM or 2ch Downmix LPCM depending on the capability of the connected device, even if you select "HDMI Multi(Normal)" in"HDMI Audio Out" setting. Refer to page 32. Copyright protection system To play back the digital video images of a BD/DVD via an HDMI connection, it is necessary that both the unit and the display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device (or AV amplifier) for more information. * HDMI: High-Definition Multimedia Interface Note • When using HDCP-incompatible display device, the image will not be viewed properly. • Among the devices that support HDMI, some devices can control other devices via the HDMI jack, this unit cannot be controlled by another device via the HDMI jack. • The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length) maybe limited by the device that is connected. • Among the monitors that support HDMI, some do not support audio output (e.g, projectors). In connections with device such as this unit, audio signals are not output from the HDMI output jack. Digital Connection to an AV Amplifier with Built-in Decoder audio digital audio coaxial/ optical cable DIGITAL AUDIO INPUT DIGITAL AUDIO INPUT OPTICAL COAXIAL or digital audio coaxial/ optical input jack OPTICAL DIGITAL OUT ( PCM / BITSTREAM ) COAXIAL FR FL 2ch AUDIO OUT SW C SR SL SBR SBL 7.1ch AUDIO OUT HDMI OUT OPTICAL VIDEO OUT S VIDEO OUT DIGITAL OUT ( PCM / BITSTREAM ) COAXIAL RS-232C Y PB/CB PR/CR COMPONENT VIDEO OUT STRAIGHT CABLE OUT IN ROOMTO ROOM REMOTE CONTROL this unit Ⅵ Audio signals output from DIGITAL OUT (OPTICAL/COAXIAL) When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that Dolby Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of DTS-HD. < When HDMI is not connected or "Audio Mute" is selected···> When HDMI is not connected or the "Audio Mute" is selected in "HDMI Audio Out" setting, the audio signals output from DIGITAL OUT changes depending on the "Digital Out" setting. Refer to the following table. To set "Digital Out", press [SETUP], then select "Quick" A "HDMI Audio Out" A "Audio Mute" or "Custom" A "Audio" A "HDMI Audio Out" A "Audio Mute". Connections Disc type Audio recording format "Digital Out" setting Bitstream LPCM Dolby Digital Dolby Digital 2ch Downmix LPCM Dolby Digital Plus Dolby Digital 2ch Downmix LPCM*2 BD-video Dolby TrueHD DTS Dolby Digital DTS*1 2ch Downmix LPCM*2 2ch Downmix LPCM DTS-HD DTS*1 2ch Downmix LPCM*2 LPCM 2ch Downmix LPCM*1 2ch Downmix LPCM Dolby Digital Dolby Digital 2ch Downmix LPCM DVD-video DTS DTS 2ch Downmix LPCM LPCM 2ch Downmix LPCM 2ch Downmix LPCM DivX® Dolby Digital MP3/MP2 Dolby Digital 2ch LPCM 2ch Downmix LPCM 2ch LPCM audio CD/ MP3/Windows Media™ Audio 2ch LPCM 2ch LPCM DTS-CD DTS 2ch Downmix LPCM *1 For the BD title with secondary or interactive audio, these audio will be output as Dolby Digital when all the conditions listed below are met: • When "BD Audio Mode" is set to "Mix Audio Output". • When "HDMI Audio Out" is set to "Audio Mute". • When "Digital Out" is set to "Bitstream". If the BD title does not have secondary or interactive audio, the audio will be output as shown in the table. *2 In order to output LPCM signal from DIGITAL OUT jack, set "BD Audio Mode" to "Mix Audio Output". (Bitstream signal will be output when "HD Audio Output" is selected.) Refer to page 23 and 32. • This table applies only when HDMI is not connected or the "Audio Mute" is selected in "HDMI Audio Out" setting. Note • In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set "BD Audio Mode" to "Mix Audio Output" and set "HDMI Audio Out" to "HDMI Multi(LPCM)". Note for Optical Cable • Optical cable may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diameter of 6 inches (15cm) or more when storing them. • Use a cable which is 9.8 feet (3m) or shorter. • Insert cable plugs firmly into the jacks when making connections. • If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a jack. Cables not included. Please purchase the necessary cables at your local store. 12 ENGLISH