Denon DVD 3800BDCI Owners Manual - English - Page 36

ENGLISH Function Setup Setting items 7.1ch Audio Out Sets the audio format for the audio output from the 7.1ch AUDIO OUT. Down Sampling Sets the digital audio output when playing BD or DVD recorded in LPCM. DRC Sets whether to compress the range of sound volume (Dynamic Range Control) when Dolby Digital, Dolby Digital Plus or Dolby TrueHD audio is played back. Options Multi Channel*: The multi-audio signals are output from the 7.1ch AUDIO OUT. Refer to pages 34-35 for setting options. 2 Channel: Down-mixed 2-channel audio signals are output from the 7.1ch AUDIO OUT jacks. On: LPCM signals are converted to 48 kHz for output. • Set to "On" when using digital connections to an AV amplifier that is not compatible with sampling frequencies of 96 kHz. Off*: For BD or DVD recorded in LPCM without copyright protection, 2-channel audio signals up to 96 kHz are output as LPCM signals with no conversion. Auto*: When the discs that are recorded in the Dolby TrueHD format is in playback, this unit detects DRC setting of the disc and set the DRC setting of this unit to "On" or "Off" automatically. Off On Source Direct Sets to output the audio without adding speaker settings to the audio signals from the disc. Bass Enhancer Sets whether to output the subwoofer when playing back content that does not have LFE (Low Frequency Effect) signal. (e.g. content with only 2 channel audio signal.) On: Select this to output the audio without any effect of speaker setting. Off*: Select this to output the audio with the effect of speaker setting. On: Audio signal will be output from the subwoofer. (Please set "Subwoofer" in the "Speaker Configuration" to "On".) Off*: No audio signal will be output from the subwoofer. Audio Adjust Sets the amount of the delay time between the picture and audio signal. 0ms to 200ms (0ms*) The audio signal will be delayed for the amount of time you set. Function Setup Setting items Options Virtual Surround Sets to create a surround effect in a system with 2 speakers connected. Off*: Virtual surround is set to off. 1: A natural surround effect in a system with 2 speakers connected. 2: A stronger surround effect in a system with 2 speakers connected than "1". • Settings with (*) are the default. • Quick menu consists of the setting menus frequently used, and they are accompanied with mark. • If you set "Source Direct" to "On", "HDMI Audio Out" to "HDMI 2ch" or "7.1ch Audio Out" to "2 Channel", "Bass Enhancer" is not available. • Under following circumstances, "HDMI Multi(Normal)", "HDMI Multi(LPCM)" and "HDMI 2ch" is not available. - HDMI cable is not connected to HDMI OUT jack. - Connected display device is off. - Connected display device is not compatible with audio output. • When "Source Direct" is set to "On", "Bass Enhancer" and "Speaker Configuration" are not available. Digital Out Setting When the "Audio Mute" is selected in "HDMI Audio Out" setting, audio signal of the HDMI is muted and the audio signals output from DIGITAL OUT changes depending on the "Digital Out" setting. Audio A HDMI Audio Out A Audio Mute Bitstream*: When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD, the corresponding core stream (Dolby Digital or DTS) are output. LPCM: LPCM signal will be output from DIGITAL OUT. • This setting is not effective when the HDMI audio signal is output. • When both HDMI and DIGITAL OUT is connected to other devices, the audio signals currently output from the HDMI OUT will be output from the DIGITAL OUT jack as well, except that Dolby Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of DTS-HD. • When "BD Audio Mode" is set to "HD Audio Output", Dolby Digital Plus, Dolby TrueHD, or DTS-HD will be output as core stream (Dolby Digital or DTS). If the audio source is Dolby Digital, DTS, or LPCM, the same audio stream type set in the "HDMI Audio Out" will be output. (When outputting Multi LPCM from HDMI OUT, 2ch Downmix LPCM will be output from DIGITAL OUT.) • When "BD Audio Mode" is set to "Mix Audio Output", the audio output from DIGITAL OUT will follow the setting in the "HDMI Audio Out". (When outputting Multi LPCM from HDMI OUT, 2ch Downmix LPCM will be output from DIGITAL OUT.) 33 ENGLISH