Denon DVD 3800BDCI Owners Manual - English - Page 37

Speaker Setting

Page 37 highlights

Function Setup Speaker Setting This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround. Front speaker (left) Subwoofer Surround speaker (left) Center speaker Front speaker (right) Surround speaker (right) Surround back speaker (left) Surround back speaker (right) To make the most of its feature, set up your speakers appropriately by referring to the table below. Speaker setting options are available at the following locations; (Available when you have HDMI cable connected to the HDMI OUT jack) Setup A Quick A HDMI Audio Out A HDMI Multi(LPCM) Setup A Custom A Audio A HDMI Audio Out A HDMI Multi(LPCM) Setup A Quick A 7.1ch Audio Out A Multi Channel Setup A Custom A Audio A 7.1ch Audio Out A Multi Channel How to navigate through the "HDMI Multi(LPCM)" and "Multi Channel" setting 1) Use [U / V] to select the menu item. 2) Use [U / V] to select setting items. • Use [RETURN] to go back to the previous screen. ENGLISH Function Setup 3) Use [Y / Z] to select desired options.(Except for "Test Tone" and "Default".) For "Test Tone": Use [Y / Z] to select "Manual" or "Auto", then press [ENTER]. • The test tone will be output. If you select "Manual", use [U / V] to select desired speaker, then use [Y / Z] to adjust the volume. If you select "Auto", use [Y / Z] to adjust the volume of the speaker that output the test tone. • If you want to stop the test tone, press [RETURN]. For "Default": Press [ENTER] to reset the "Delay Time" setting to the default. 4) Press [SETUP] to exit. Menu Speaker Configuration Select the desired speaker to set. Then change the setting appropriately by referring to the descriptions. Setting items Front Center Subwoofer Surround Surround Back Crossover Freq: For speakers set to "Small", the sound with frequencies below that of this frequency are cut. This bass sound that has been cut is output from the subwoofer or a speaker for which "Large" is set. Options Large* Small Large* Small/None On* Off Large* Small/None Large* Small/None 40/60/80*/ 100/120Hz Descriptions Large: For the large speakers with strong low frequency reproduction capabilities. Small: For the small speakers which do not provide strong bass sound. None: No speakers. For "Subwoofer" there is only "On" or "Off". Select according to the low frequency reproduction capabilities of the connected speaker. • For "Speaker Configuration", the settings of each speaker sizes may be adjusted automatically corresponding to each setting. (e.g. If the "Front" is set to "Small", the "Subwoofer" will automatically set to "On" and also you cannot set "Center", "Surround", and "Surround Back", to "Large".) • If you connect to 5.1-channel surround system, set "Surround Back" in "Speaker Configuration" to "None". • "None" for "Center", "Surround" and "Surround Back" is not available for the speaker setting for the audio signal output from the HDMI OUT jack . • "Off" for "Subwoofer" is not available for the speaker setting for the audio signal output from the HDMI OUT jack. 34 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

34
Function Setup
Function Setup
ENGLISH
ENGLISH
Speaker Setting
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel
surround.
<Example of basic layout with 7.1ch surround system>
To make the most of its feature, set up your speakers appropriately by referring to the table below.
Speaker setting options are available at the following locations;
<Speaker setting for the audio signal output from the HDMI OUT jack >
(Available when you have HDMI cable connected to the HDMI OUT jack)
Setup
A
Quick
A
HDMI Audio Out
A
HDMI Multi(LPCM)
Setup
A
Custom
A
Audio
A
HDMI Audio Out
A
HDMI Multi(LPCM)
<Speaker setting for the audio signal output from the 7.1ch AUDIO OUT jacks >
Setup
A
Quick
A
7.1ch Audio Out
A
Multi Channel
Setup
A
Custom
A
Audio
A
7.1ch Audio Out
A
Multi Channel
How to navigate through the “HDMI Multi(LPCM)” and “Multi Channel” setting
1)
Use [
/
] to select the menu item.
2)
Use [
/
] to select setting items.
• Use
[RETURN]
to go back to the previous screen.
3)
Use [
/
] to select desired options.(Except for “Test Tone” and “Default”.)
For “Test Tone”:
Use [
/
] to select “Manual” or “Auto”, then press [ENTER].
The test tone will be output. If you select “Manual”, use
[
/
]
to select desired speaker, then use
[
/
]
to adjust the volume. If you select “Auto”, use
[
/
]
to adjust the volume of the speaker
that output the test tone.
If you want to stop the test tone, press
[RETURN]
.
For “Default”:
Press [ENTER] to reset the “Delay Time” setting to the default.
4)
Press [SETUP] to exit.
For “Speaker Configuration”, the settings of each speaker sizes may be adjusted automatically
corresponding to each setting. (e.g. If the “Front” is set to “Small”, the “Subwoofer” will automatically
set to “On” and also you cannot set “Center”, “Surround”, and “Surround Back”, to “Large”.)
If you connect to 5.1-channel surround system, set
“Surround Back”
in
“Speaker Configuration”
to
“None”.
“None”
for “Center”, “Surround” and “Surround Back” is not available for the speaker setting for the
audio signal output from the HDMI OUT jack .
“Off” for “Subwoofer” is not available for the speaker setting for the audio signal output from the
HDMI OUT jack.
Front speaker (left)
Surround speaker (left)
Surround speaker (right)
Surround back speaker (left)
Surround back speaker (right)
Front speaker (right)
Center speaker
Subwoofer
Menu
Setting items
Options
Descriptions
Speaker Configuration
Select the desired
speaker to set. Then
change the setting
appropriately by
referring to the
descriptions.
Front
Large*
Large:
For the large speakers
with strong low frequency
reproduction capabilities.
Small:
For the small speakers
which do not provide
strong bass sound.
None:
No speakers.
For “Subwoofer” there is
only “On” or “Off”.
Small
Center
Large*
Small/None
Subwoofer
On*
Off
Surround
Large*
Small/None
Surround Back
Large*
Small/None
Crossover Freq:
For speakers set to
“Small”, the sound
with frequencies
below that of this
frequency are cut.
This bass sound that
has been cut is
output from the
subwoofer or a
speaker for which
“Large” is set.
40/60/80*/
100/120Hz
Select according to the
low frequency
reproduction capabilities
of the connected speaker.