Denon POA-3012CI Owners Manual - English - Page 17

Getting Started Connections Setup Operations Troubleshooting Specifications ENGLISH g ZONE TRIGGER ON MODE Sets the operating specifications for the power amplifiers of each ZONE. [Selectable Channels] For details of the channels which can be set in each mode, see GSelectable ChannelsH in "f OPERATION MODE" (vpage 13). [Selectable items] CONSTANT : The power amplifier operates constantly. TRIG. IN : T he power amplifier operates when trigger input is detected. When trigger input is not detected, it remains in standby mode. A.SIGNAL : T he power amplifier operates when an audio signal is input. If no input is received for a period of 10 minutes, it switches to standby mode. OFF : Turns the power amplifier off. The POA-3012CI accepts +3 ~ 30V trigger input. j POWER CONFIGURATION Select the method for turning on the POA-3012CI. [Selectable items] POWER BUTTON : Operate with the ON/STANDBY button only. ON LINE : O perate from an external device via Ethernet or RS-232C input. MASTER TRIGGER : O perate by detection of a trigger signal input to the MASTER TRIGGER input terminal. • Turns on when a signal is detected. • If no input is received for a period of 10 minutes, it switches to standby mode. • The POA-3012CI accepts +3 ~ 30 V trigger input. • Even when "ON LINE" or "MASTER TRIGGER" has been set, power source operation is possible by means of ON / STANDBY button. Network Setup Make network settings. F Menu tree F Main Setup Network Setup a Network Information s Network Setup • If you are using a broadband router (DHCP function), there is no need to make the settings at "Setting the IP Address" and "Setting the Proxy", since the DHCP function is set to "ON" in the POA-3012CI's default settings. • If the POA-3012CI is being used connected to a network without the DHCP function, the network settings must be made. In this case, some knowledge of networks is required. For details, consult a network administrator. • If you cannot connect to the Internet, recheck the connections and settings (vpage 8). • If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the store from which you purchased your computer. h DIMMER MODE Adjust display brightness of the POA-3012CI. [Selectable items] Bright : Normal display brightness. Dim : Reduced display brightness. Dark : Very low display brightness. OFF : Display is off unless controls are operated. When setting to "Dim", "Dark" and "OFF", the display brightness changes to "Bright" for about 3 seconds during the operation before reverting to the set brightness. • DHCP (Dynamic Host Configuration Protocol) : These are systems by which the IP address and other network settings are automatically set for the POA-3012CI, computer, broadband router and network devices. • DNS (Domain Name System) : This is a system for converting the domain names used when browsing Internet sites (for example, "www.denon.jp") into the IP addresses actually used for communications (for example, "202.221.192.106"). a Network Information Display network information. [Items to be checked] DHCP= ON or OFF IP Address MAC Address 14