Denon POA-3012CI Owners Manual - English - Page 19

Getting Started Connections Setup Operations Troubleshooting Specifications r Use the following buttons to input the proxy server address or domain name and press the SELECT / ENTER knob. b Button functions when entering address SELECT / ENTER knob:Turn Select u button : i button : Press Confirm Cursor to right Cursor to left ZONE 6 button : Setting during address entry ZONE 5 button : Cancel entry DISPLAY button : Character insert / delete / overwrite Cursor 1 : Character insert Cursor 0 : delete Cursor 2 : overwrite When "Address" is selected in step e : Input the address When "Name" is selected in step e : Input the domain name t Turn the SELECT/ENTER knob to select the "Port" and press SELECT/ENTER knob. y Use the above buttons to input the proxy server port number and press the SELECT/ENTER knob. u Press the SELECT/ENTER knob. Setup is complete. Option Setup Make various other settings. F Menu tree F Main Setup Option Setup a Setup Lock s Maintenance d Firmware Update a Setup Lock Protect settings from inadvertent change. [Selectable items] ON : Turn protection on. OFF : Turn protection off. To cancel the setting, press the SETUP button to re-display the "Setup Lock", then change the setting to "OFF". s Maintenance This sets the function for maintenance by a DENON serviceperson or installer. (For professional use only.) This function allows a DENON serviceperson or installer to check the POA-3012CI's status and make settings via the Internet. NOTE Only use this function if so instructed by a DENON serviceperson or installer. ENGLISH d Firmware Update Update the firmware of the multi channel power amplifier. Update Check You can check for firmware updates. You can also check approximately how long it will take to complete an update. Update Start Execute the update process. When updating starts, the power indicator lights red. "Updating zzz" is shown on the display during updating. Once updating is completed, "Updatingcomplete" is displayed. "Latest firmware" is displayed when the firmware is the latest version. b If the display reads as shown below, check the settings and network environment, then update again. Display Description Updating failed Updating failed. Login failed Failure to log into server. Server is busy Server is busy. Wait a while then try again. Connection fail Failure connecting to server. NOTE • Connection to the network and specific settings are required to update the firmware. For details, see page 8, 15. • Do not turn off the power until updating is completed. • Normally there is no need to use this function, aside from the cases described below. ⋅ The Firmware Update function is only used for updating the firmware (free or for a charge) via the Internet, for example for the purpose of adding functions to the POA-3012CI in the future. ⋅ Information regarding the Firmware Update function will be announced on the DENON web site each time related plans are defined. ⋅ A broadband connection to the Internet is required to use this function (v page 8). ⋅ Even with a broadband connection to the Internet, approximately 13 min is required for the updating procedure to be completed. Once updating starts, normal operations on the POA-3012CI cannot be performed until updating is completed. Furthermore, updating the firmware may reset the backup data for the parameters, etc., set for the POA-3012CI. 16