Denon POA-3012CI Owners Manual - English - Page 21

Getting Started Connections Setup Operations Troubleshooting Specifications 5 Operate. GExample: 1H Channel Setup Screen Click when you update to the latest information (z) Click on the tab you want to set, and select from the displayed items. Enter figures or click "< " or ">" to make the setting, and then click "Set". z:Normally, there is a change to the latest information each time you operate. When operated from the main unit, click because the screen is not updated. GExample: 2H System Setup Screen Click "v" and select from the displayed items. GExample: 3H Warning and Protection Data Screen Displays Warning and Protection Data. GExample: 4H Audio Signal and Trigger Input Screen Displays On / Off of Audio signal and Trigger In. No setting item. GExample: 5H Option Setup Screen Click "S" for the item you want to set. Click when Firmware Update starts. ENGLISH To use the web control function, set the menu "Main Setup" - "POWER CONFIGURATION" - "ON LINE" (vpage 14). NOTE • To perform web control, you must connect a web control device such as a PC to the same network as the POA-3012CI. • With web control, some network settings, etc., cannot be set. • When updating firmware, settings made by the web controller may be reset. Resetting the Microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. 1 Unplug the power cord from the power outlet. 2 Turn the power on (or connect the power cord to the power outlet) while simultaneously pressing the ZONE 5 and DISPLAY buttons. 3 When all Zone operation mode indicators are illuminated in red and " zEEPROM INIT.z" is displayed, release finger from two buttons. If in step 3 the could not be start over from step 1. 18