Dewalt D25951K Instruction Manual - Page 9

In addition to the warranty, DeWALT tools are covered by our: 2 YEARS FREE SERVICE DeWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first two years after purchase. 90 DAY MONEY BACK GUARANTEE If you are not completely satisfied with the performance of your DeWALT Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund - no questions asked. LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country specific warranty information contained in the packaging, call the local company or see website for warranty information. FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-4-DeWALT (1-800-433-9258) for a free replacement. English TROUBLESHOOTING GUIDE BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS For assistance with your product, visit our website at www.dewalt.com for a list of service centers, or call DeWALT at 1-800-4-DeWALT (1-800-433-9258). PROBLEM POSSIBLE CAUSE SOLUTION Tool will not start. The extension cord and/or plug is defective. Have the extension cord and/or plug checked by a qualified electrician and replaced if necessary. Internal componets too hot. Allow tool to cool down. Brushes worn out. Have brushes replaced by an authorized DeWALT service center. Reduced Power. The extension cord is too long and/or its gauge Use an extension cord of an approved length and/or of is inadequate. adequate gauge. The voltage provided by the electric supply is inadequate. Connect the hammer to an adequate electric supply. The chisel cannot be released. The chuck is not pulled back fully. Pull the chuck back as far as it will go and remove the chisel. Refer to Inserting and Removing SDS MAX Chisels. 7