Dewalt DCC020IB Instruction Manual - Page 12
Using the Inflator as a Pressure Gauge
View all Dewalt DCC020IB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
English 1. Remove the high-pressure hose 10 from its storage channel. 2. Attach a nozzle as described in the Fitting the Accessories section. Attach the chuck to the tire stem to inflate a tire, or attach an accessory to inflate a ball or other inflatable. 3. Attach or insert the nozzle into the object being inflated. 4. Press the power switch 2 . The inflator will default to High-Pressure inflation mode. NOTE: The pressure gauge display 9 will only show inflation pressures when the inflator is in highpressure mode. NOTE: To switch between pressure units, press and hold the inflation mode switch 3 and the LED light switch 4 while rotating the pressure adjustment knob 6 . 5. Rotate the pressure adjustment knob 6 to set the desired pressure. 6. Press the inflation start/pause button 7 to begin inflation. 7. To stop the inflator at any time, press the inflation start/ pause button 7 . 8. When the item to be inflated has reached the preset value, the unit will automatically turn off. NOTE: You may notice the actual pressure reading may drop after a couple of seconds. This is normal. NOTE: If the power switch 2 is turned off, all settings will be lost and will need to be reentered. This is a safety feature to prevent the risk of items OVER INFLATING. Using the Inflator as a Pressure Gauge 1. Connect the high-pressure hose 10 to the item to be checked. 2. Press the power switch 2 . 3. The pressure gauge display 9 will display the item's pressure. MAINTENANCE WARNING: To reduce the risk of serious personal injury, turn unit off, remove the battery pack and disconnect it from the power source before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury. Storage Recommendations Store the inflator indoors. The best storage place is one that is cool and dry, away from direct sunlight and excess heat or cold. Lubrication This unit requires no additional lubrication. Cleaning WARNING: Blow dirt and dust out of all air vents with clean, dry air at least once a week. To minimize the risk of eye injury, always wear ANSI Z87.1 approved eye protection when performing this. 10 WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the plastic materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. Accessories WARNING: Since accessories, other than those offered by DeWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DeWALT recommended accessories should be used with this product. Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center. If you need assistance in locating any accessory, please contact DeWALT Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286, call 1-800-4-DeWALT (1-800-433-9258) or visit our website: www.dewalt.com. Repairs The charger, battery pack and external power supply are not serviceable. If the inflator will not turn on, check the battery, all connections, and the fuse in the 12V DC vehicle connector 19 ). The inflator display will show an error code under certain conditions. Refer to the Troubleshooting Error Codes chart. WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement, when applicable) should be performed by a DeWALT factory service center or a DeWALT authorized service center. Always use identical replacement parts. Register Online Thank you for your purchase. Register your product now for: • WARRANTY SERVICE: Registering your product will help you obtain more efficient warranty service in case there is a problem with your product. • CONFIRMATION OF OWNERSHIP: In case of an insurance loss, such as fire, flood or theft, your registration of ownership will serve as your proof of purchase. • FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act. Register online at www.dewalt.com/register. Three Year Limited Warranty DeWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-DeWALT (1-800-