Dewalt DCN45RND1 Instruction Manual - Page 17

ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so these limitations may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces. In addition to the warranty DeWALT tools are covered by our: 1 YEAR FREE SERVICE DeWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase. Nailer wear items such as return springs, driver blades, and bumpers are not covered. 2 YEARS FREE SERVICE ON DeWALT BATTERY PACKS DC9071, DC9091, DC9096, DC9182, DC9280, DC9360, DCB120, DCB122, DCB124, DCB127, DCB201, DCB203BT, DCB207, DCB361 3 YEARS FREE SERVICE ON DeWALT BATTERY PACKS DCB200, DCB203, DCB204, DCB204BT, DCB205, DCB205BT, DCB206, DCB230, DCB606, DCB609, DCB612 English NOTE: Battery warranty voided if the battery pack is tampered with in any way. DeWALT is not responsible for any injury caused by tampering and may prosecute warranty fraud to the fullest extent permitted by law. 90 DAY MONEY BACK GUARANTEE If you are not completely satisfied with the performance of your DeWALT Power Tool or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund - no questions asked. LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country specific warranty information contained in the packaging, call the local company or see website for warranty information. FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-4-DeWALT (1-800-433-9258) for a free replacement. TROUBLESHOOTING GUIDE MANY COMMON PROBLEMS CAN BE SOLVED EASILY BY UTILIZING THE CHART BELOW. FOR MORE SERIOUS OR PERSISTENT PROBLEMS, CONTACT A DeWALT SERVICE CENTER OR CALL 1-(800)-4-DeWALT.  WARNING: To reduce the risk of serious personal injury, ALWAYS disconnect battery pack from tool before all repairs. SYMPTOM Motor does not run with trigger depressed Motor does not run with contact trip depressed CAUSE Trigger lock in locked position. Tool is stalled, locking the motor from rotating. Tool internal electronics need to be reset. Motor stops running after 5 seconds. Terminals are dirty or damaged. Damaged internal electronics. Damaged trigger. Trigger lock in locked position. Tool is stalled, locking the motor from rotating. Bent contact trip. Motor stops running after 5 seconds. Terminals are dirty or damaged. Damaged internal electronics. Damaged trigger. FIX Unlock trigger lock. Rotate the stall release lever on the tool and the mechanism will release. If driver blade does not return, remove battery and manually push driver blade back to home position. Remove battery, wait 3 seconds and reinsert. Normal operation, release trigger and redepress. See authorized service center. See authorized service center. See authorized service center. Unlock trigger lock. Rotate the stall release lever on the tool and the mechanism will release. If driver blade does not return, remove battery and manually push driver blade back to home position. See authorized service center. Normal operation, release contact trip and redepress. See authorized service center. See authorized service center. See authorized service center. 15