Dewalt DCR025 Instruction Manual - Page 9
Assembly And Adjustments, Operation - release date
View all Dewalt DCR025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Intended Use This DeWALT Bluetooth® radio/charger is designed for broadcast radio reception or to play/stream audio via a wireless Bluetooth® connection or wired connection to a mobile phone or other audio device and charge DeWALT batteries. DO NOT use under wet conditions or in presence of flammable liquids or gases. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool. ASSEMBLY AND ADJUSTMENTS WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/ installing attachments or accessories. An accidental start-up can cause injury. To Install Coin Cell Battery (Fig. D) WARNING: Danger of explosion if battery is incorrectly replaced. When replacing battery, replace it with the same or equivalent type CR2032. Observe correct polarity (+ and -) when replacing batteries. Do not store or carry batteries so that metal objects can contact exposed battery terminals. 1. On the battery door on the back of the unit, turn the screw 22 counterclockwise to remove. Screw will remain captive in the door. Fig. D 22 23 2. Press down on the battery door latch and pull to open. 3. Install the coin cell battery 23 according to the diagram inside the coin cell battery area. 4. Replace the battery door, insert the screw and tighten. NOTE: To reset the LCD display, clock, and pre-sets remove the coin cell battery and re-install. Follow this procedure if the screen seems to lock in place. DANGER: DO NOT INGEST BATTERY; CHEMICAL BURN HAZARD. This product contains a coin/ button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely stop using the product and keep it away from children If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. English OPERATION WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/ installing attachments or accessories. An accidental start-up can cause injury. Your Bluetooth® radio/charger is equipped with memory capacity in order to store the time and your selected memory channels. When the radio is in the OFF position, this memory capacity is powered by one coin cell battery that is included with the radio/charger. Power/Volume Adjustment 1. To turn the radio on and off, press the ON/OFF button 1 . 2. Turn the dial 2 clockwise to increase the volume. To decrease the volume, turn counterclockwise. Note the volume can also be muted by pressing the mute button 9 . Mode Function To choose one of the mode functions (FM1, FM2, AM, AUX or Bluetooth) push the mode button 6 until the desired function is found. NOTE: Pressing the Bluetooth button 13 also puts the radio into Bluetooth mode. Tune or Seek Function There are two tuning methods and one seek method for finding the desired frequency. To tune: Press and release the right or left arrow button 5 . Repeat until the desired frequency is found. To seek: Press and hold the right or left arrow button 5 for 2 seconds. The tuner frequency will change to the first radio station with acceptable clarity and stop at that station. NOTE: When the radio/charger is paired to a Bluetooth® device the right and left arrow buttons 5 can be used to skip or go to previous tracks on the audio device. To Program the Clock 1. Power on the radio. 2. Press the clock button. The date and time will be displayed, and the year will begin to blink. 3. Use the clock button to pick the parameter of time desired and use the right and left arrows to adjust. NOTE: If you do not press a button within 5 seconds, the clock programming feature will automatically return to the previous setting. To Program the Memory Buttons Ten FM and five AM radio stations may be independently set. After programming the buttons, pressing 1, 2, 3, 4 or 5 will instantly change the frequency to the preset station. 1. Turn power on. 2. Set the radio to desired station (see Tune or Seek Function). 7