Dewalt DW0811LR Instruction Manual - Page 4

EN User Manual WARNING: Hazardous Radiation. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Contents • Safety • Product Overview • Batteries and Power • Operation • Accuracy Check and Calibration • Specifications The label on your tool may include the following symbols. V volts mW milliwatts laser warning symbol nm wavelength in nanometers 2 Class 2 Laser User Safety Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage. Warning Labels For your convenience and safety, the following labels are on your laser.  WARNING: To reduce the risk of injury, user must read instruction manual. 5002595 ≤1.5mW @ 630-680nm IEC 60825-1: 2014 WARNING: LASER RADLIaAsTerIOArNtw.orDkO NOT STARE INTO BEAM. Class 2 Laser Product 5002595 ≤1.5mW @ 630-680nm IEC 60825-1: 2014 5002595 ≤1.5mW @ 630-680nm IEC 60825-1: 2014 Laser Artwork Visual Result 5002595 ≤1.5mW @ 510-530nm IEC 60825-1: 2014 Laser Artwork 5002595 ≤1.5mW @ 630-680nm IEC 60825-1: 2014 5002595 ≤1.5mW @ 510-530nm IEC 60825-1: 2014 If you have any questions or comments about this or any dewalt tool, call 1-800-4-DeWALT (1-800-433-9258) • or go to www.dewalt.com on the Internet. WARNING: • Read and understand all instructions. Failure to follow the warnings and instructions may result in electric shock, • fire and/or serious injury. SAVE THESE INSTRUCTIONS • WARNING: Laser Radiation Exposure. Do not disassemble or modify the laser level. There are no user serviceable parts inside. Serious eye injury could result. Visual 5002595 Result Visual Result ≤1.5mW @ 510-530nm Do not operate the laser IEC60825-1:2014 in explosive atmospheres, such as in the prLeasseernArctweorok f flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. Use the laser only with the specifically designated batteries. Use of 5002595 any other batteries may create a risk of fire. ≤1.5mW @ 510-530nm IEC 60825-1: 2014 Store idle laser out of reach of children and other untrained pVeisrusaloRnessu.ltLasers are dangerous in the hands of untrained users. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one laser, may create a risk of injury when used on another laser. 6 • Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in injury. To locate your nearest DeWALT service center call 1-800-4-DeWALT (1-800-433-9258) or go to www.dewalt.com on the Internet. • Do not use optical tools such as a telescope or transit to view the laser beam. Serious eye injury could result. • Do not place the laser in a position which may cause anyone to intentionally or unintentionally stare into the laser beam. Serious eye injury could result. • Do not position the laser near a reflective surface which may reflect the laser beam toward anyone's eyes. Serious eye injury could result. • Turn the laser off when it is not in use. Leaving the laser on increases the risk of staring into the laser beam. • Do not modify the laser in any way. Modifying the tool may result in hazardous laser radiation exposure. • Do not operate the laser around children or allow children to operate the laser. Serious eye injury may result. • Do not remove or deface warning labels. If labels are removed user or others may inadvertently expose themselves to radiation. • Position the laser securely on a level surface. Damage to the laser or serious injury could result if the laser falls Laser Information • The DW089LR, DW089LG 3-Beam 360° Line Laser and the DW0811LR, DW0811LG 2-Beam 360° Line Laser are Class 2 laser products. The lasers are self-leveling laser tools that can be used for horizontal (level) and vertical (plumb) alignment projects. This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser Notice 50, dated June 24, 2007. Conforms to UL STDS 61010-1 & 2595 Certified to CSA STD C22.2 No. 61010-1 Electrical Safety • Use battery operated tool only with the specifically designed batteries. Use of any other batteries may create a risk of fire. Product Overview WARNING: Never modify the tool or any part of it. Damage to the laser or personal injury could result. Figure 2 - Battery Interface A Figure 1A - Pendulum Lock B Figure 1B - Keypad C Figure 1B - ON/OFF button: horizontal laser line D Figure 1B - ON/OFF button: side laser line E Figure 1B - ON/OFF button: front vertical laser line (DCE089R/G only) F Figure 2 - Magnetic pivot bracket G Figure 4 - Tripod thread fitting (1/4 - 20 & 5/8 -11) I Figure 1B - Battery level indicator J Figure 5 - Ceiling Mount Clamp K Figure 5 - Ceiling Mount L WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. Figure 5 - Screw Hole M Work Area • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. • Do not operate laser tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. • Keep children and bystanders away while operating a laser tool. Distractions can cause you to lose control. 7