Dewalt DWE43066N Instruction Manual - Page 15

ACCESSORIES CHART 4.5" (115 mm) and 6" (150mm) Grinding Wheels Wire Wheels English Type 27 guard unthreaded backing flange Type 27 depressed center wheel threaded locking flange Type 27 guard Type 27 guard Type 27 hubbed wheel 3 - 5" * (76.2 - 127 mm) wire cup brush 4.5" (115 mm) and 6" (150mm) Sanding Flap Discs Type 27 guard Type 27 guard unthreaded backing flange hubbed sanding flap disc non-hubbed sanding flap disc threaded locking flange 4.5" (115 mm)and 6" (150mm) Cutting Wheels Type 27 guard 4"-6" (100-150 mm) wire wheel Sanding Discs rubber backing pad sanding disc sanding clamp nut Type 1/41 guard* unthreaded backing flange Type 1/41 guard* unthreaded backing flange Type 1/41 guard* unthreaded backing flange Type 27/42 depressed center wheel, cutting only threaded locking flange Type 1/41 abrasive cutting wheel threaded locking flange diamond cutting wheel threaded locking flange Type 1/41 guards are intended for use with Type 1/41 cutting wheels and Type 27 wheels marked for cutting only. Grinding with wheels other than Type 27 and Type 29 require different accessory guards. Always use the smallest proper guard possible that does not contact the accessory. * NOTE: A Type 1/41 guard is available at extra cost from your local dealer or authorized service center. * NOTE: A Type 1/41 guard is included with the DWE43066 and DWE43066N. 13