Dirt Devil M110006 Manual - Page 4
How To Operate, How To Operate: Continued, Dirt Container & Filter: Removal & Replacement
View all Dirt Devil M110006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
CORD RELEASE 1. HOW TO OPERATE HEIGHT ADJUST LEVER 2. Turn Quick Cord Release for easy cord removal. Store cord in cord clip (see Features - pg. 5) to keep out of the way while vacuuming. Turn the height adjustment knob to match the surface being cleaned. IMPORTANT: For easiest adjustment, place cleaner in full upright position. CAUTION: Brush agitator continues to rotate while hose is removed or in use and at all times while cleaner is on. Keep hair, loose clothing, fingers, and all parts of body away from brush area while cleaner is on. Cleaner must be in the upright position to lift the rotation brush off the carpet when cleaning above the floor. ON/OFF PEDAL HANDLE RELEASE PEDAL FLOOR/CARPET CLEANING 3. Plug cord into electrical outlet. Turn cleaner on by depressing foot pedal located on the back left side of the cleaner. 4. To release handle, push the handle release pedal located on the lower left side of the cleaner. 1. Move the handle and adjust it to a the desired b position for (a) storing the upright, (b) c operating the cleaner, and (c) de-press the handle release pedal again to clean under furniture. NOTE: Rotating brush could cause area rug fringe to become tangled within cleaner. Use caution when vacuuming throw rugs with fringe. ABOVE FLOOR CLEANING 1. Cleaner must be in its upright position to raise brushroll. 2. Remove the hose from the tool caddy. 3. Choose any of the handy accessories or use the hose alone. Simply push the attachment firmly onto the end of the wand or hose handle. To remove tool, twist and pull apart gently. 7 EXTENSION WAND 4. HOW TO OPERATE: CONTINUED CARRY HANDLE 1. If additional length is needed, use the extension wand and crevice tool. Pull crevice tool out of extension wand. Use extension wand and crevice tool together or separately. Use the carry handle on the Power Brush Tool caddy to move the cleaner from room to room. DIRT CONTAINER & FILTER: REMOVAL & REPLACEMENT WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING. FILTER TYPE F13 For F13 filter replacement, please call 1-800-321-1134 or visit our website at www.dirtdevil.com to locate a dealer nearest you. EMPTY DIRT CONTAINER REMOVE FILTER CARTRIDGE 1. 2. 2a. 1. Press dirt container release button and remove dirt container from cleaner. 2. Hold dirt container over garbage can and press clean release dirt container button to empty. Snap dirt container bottom back into place after emptying. REMOVE FOAM FILTER 3. Click buttons on the base of the cleaner toward the outside edges to unlock filter cartridge. CLEAN PLEATED FILTER 4. Lift filter cartridge out of base of cleaner. Remove foam filter from filter cartridge. 8 Tap the pleated filter on the inside of a garbage can to remove excess dust and dirt from filter. If filter is still clogged, rinse under running water and allow to dry for at least 24 hours before replacing in cleaner.