Dynex DX-L40-10A User Manual (English) - Page 15

DX-L40-10A_09-0537_MAN_ENG_V1.book Page 12 Tuesday, July 28, 2009 10:07 AM 12 DX-L40-10A Making connections Connecting a computer Tip: Some computers have an HDMI connector, which can be used for a better picture. To connect a computer: 1 Make sure that your TV's power cord is unplugged and the computer is turned off. 2 Connect a VGA cable to the VGA jack on the computer, then connect the other end of the cable to the VGA jack on the back of your TV. Note: The VGA cable should be a 15-pin D-Sub (analog RGB) cable. Audio cable (stereo mini plugs) R Connecting headphones To connect headphones: • Connect your headphones to the HEADPHONE jack on the side of your TV. S-VIDEO HEADPHONE Side of TV Headphones VIDEO L HDMI1 HDMI3 HDMI2 AUDIO OUT AV2 ḤḤḤL ḤR VIDEOḤḤḤL ḤḤR L R COMP1 Y PB PRḤḤḤḤL R COMP2 Back of TV VGA cable Computer 3 Connect an audio cable to the AUDIO OUT jack on the computer, then connect the other end of the cable to the VGA AUDIO IN jack on the back of your TV. Note: The audio cable should have a stereo mini plug. To play video from a computer: 1 Turn on your TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press or to select VGA, then press ENTER. 3 Turn on the computer, then adjust the display properties, if necessary. SERVICE Note: Loud noise can damage your hearing. When using headphones, use the lowest volume setting that still lets you hear the sound. Connecting an external sound system To connect an external audio device: 1 Make sure that your TV's power cord is unplugged and the component video device is turned off. 2 Connect an analog audio (L and R) cable to the Audio Out (L/R) jacks on the back of your TV. - OR - Connect a digital optical (Toslink) cable to the DIGITAL OUTPUT jack on the side of your TV. HDMI3 HDMI2 AUDIO OUT ḤḤḤL ḤR AV2 HDMI1 SVEIDREVOIḤCḤḤEL ḤḤR L R COMP1 Y PB PRḤḤḤḤL R COMP2 Analog audio cables Back of TV Side of TV VIDEOḤḤḤ L ḤḤR O S-VHIDEEADPHONEḤḤḤḤ Digital optical (Toslink) audio cable Stereo Digital amplifier 3 Connect the other end of the analog audio (L and R) cable to the AUDIO IN jacks on the analog stereo receiver. - OR - Connect the other end of the digital optical (Toslink) cable to the DIGITAL INPUT jack on the digital amplifier.