Dynex DX-L40-10A User Manual (English) - Page 22

DX-L40-10A_09-0537_MAN_ENG_V1.book Page 19 Tuesday, July 28, 2009 10:07 AM Maintenance DX-L40-10A 19 Problem Solution You cannot access some items The TV cabinet creaks The buttons do not work • If a setting or option is grayed out, it is not available in the current input mode. • When you are using your TV, the temperature inside the cabinet increases. This causes the cabinet to expand or contract, causing the creaking noise. This is not a malfunction. • Unplug the power cord for a few seconds, then plug it back in and turn on your TV. Notes: If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again. Contact us by logging on to www.dynexproducts.com or by calling DYNEX Customer Service at (800) 304-2204 (USA and Canada only). Maintenance Just like with any other household appliance, the performance and life- expectancy of your TV depends on how well you maintain it. Follow the procedures described here to clean the TV case and the LCD screen. Cautions: • Make sure that the TV is turned off and the power cord is disconnected from the power outlet before cleaning the TV. • Never spray or pour any liquid directly onto the screen or the case. Cleaning • Clean your TV with a soft, dry cloth. If surfaces are extremely dirty, use a soft cloth dampened with a small amount of non-ammonia, non-alcohol-based, mild, non-abrasive detergent. • Clean the screen with a clean, soft, lint-free cloth. If additional cleaning is necessary, apply a small amount of non-ammonia, non-alcohol-based glass cleaner onto a clean, soft, lint-free cloth, then wipe the screen. Specifications Design and specifications are subject to change without notice. Dimensions and weight are approximate. TV model TV type TV panel TV system DX-L40-10A LCD 40-inch TFT LCD NTSC-M, ATSC Channels Audio output Power requirement Power consumption Dimensions Weight Audio/video input terminals Audio/video output terminals VHF: 2-13 UHF:-14-69 CATV: 1-125 CADTV: 1-135 DTV: 2-69 Audio multiplex BTSC system 7 w x 2 AC 120 V~60 Hz 185 W 48 x 9 x 28.3 inches (122 x 22.9 x 71.9 cm) 53 lbs. (24 kg) Composite video/left and right audio (2) S-Video (1) Component video/left and right audio (2) HDMI (3) VGA/audio (1) ANT/CABLE in (1) Left and right audio Headphone jack (1) Optical digital audio (1) Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced technician for help.