Edimax BR-6624 Manual - Page 18

Settings - Primary Setup

Get Edimax BR-6624 PDF manuals and user guides View all Edimax BR-6624 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Settings - Primary Setup Connection Mode Connection Type Address Info PPPoE / PPTP Dialup DNS Select the appropriate setting: • Enable - Select this if you have connected a broadband modem to this port. • Disable - Select this if there is no broadband modem connected to this port. • Backup - Use this if you have a broadband modem on each port, and wish to normally use only one. Select Enable for the primary port, and Backup for the secondary port. The Backup port will only be used if the primary port fails. Check the data supplied by your ISP, and select the appropriate option. • Static IP - Select this if your ISP has provided a Fixed or Static IP address. Then enter the data into the Address Info fields. • Dynamic IP - Select this if your ISP provides an IP address automatically, when you connect. You can ignore the Address Info fields. • PPPoE - Select this if your ISP uses this method. (Usually, your ISP will provide some PPPoE software. This software is no longer required, and should not be used.) If this method is selected, you must complete the PPPoE dialup fields. Note: If using the PPTP connection method, select Static IP or Dynamic IP, as appropriate, according to the IP address method used by your ISP. This is for Static IP users only. Enter the address information provided by your ISP. If your ISP provided multiple IP address, you can use the Multi-DMZ screen to assign the additional IP addresses. This is for PPPoE and PPTP users only. • Enter the Username and Password provided by your ISP. • If using PPTP, enable the PPTP Connection checkbox, and enter the IP address of the PPTP server. • Host name (Optional For PPPoE),This field is used by a Host to uniquely associate an access concentrator to a particular Host request. Note: There are additional PPPoE/PPTP options on the Port Options screen. To use multiple PPPoE sessions on either port, configure the Advanced PPPoE screen. If using a Fixed IP address, you MUST enter at least 1 DNS address. If using Dynamic IP or PPPoE, DNS information is optional. Page 14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
Page 14
Settings – Primary Setup
Connection
Mode
Select the appropriate setting:
•
Enable
– Select this if you have connected a broadband modem to this
port.
•
Disable
– Select this if there is no broadband modem connected to this
port.
•
Backup
– Use this if you have a broadband modem on each port, and wish
to normally use only one. Select
Enable
for the primary port, and
Backup
for the secondary port. The
Backup
port will only be used if the primary port
fails.
Connection
Type
Check the data supplied by your ISP, and select the appropriate option.
•
Static IP
– Select this if your ISP has provided a Fixed or Static IP
address. Then enter the data into the
Address Info
fields.
•
Dynamic IP
– Select this if your ISP provides an IP address automatically,
when you connect. You can ignore the
Address Info
fields.
•
PPPoE
– Select this if your ISP uses this method. (Usually, your ISP will
provide some PPPoE software. This software is no longer required, and
should not be used.)
If this method is selected, you must complete the
PPPoE dialup
fields.
Note:
If using the PPTP connection method, select
Static IP
or
Dynamic IP
, as
appropriate, according to the IP address method used by your ISP.
Address Info
This is for
Static IP
users only. Enter the address information provided by your
ISP. If your ISP provided multiple IP address, you can use the
Multi-DMZ
screen to assign the additional IP addresses.
PPPoE / PPTP
Dialup
This is for
PPPoE
and
PPTP
users only.
•
Enter the
Username
and
Password
provided by your ISP.
•
If using PPTP, enable the
PPTP Connection
checkbox, and enter the IP
address of the PPTP server.
•
Host name (Optional For PPPoE),This field is used by a Host to uniquely
associate an access concentrator to a particular Host request.
Note:
There are additional PPPoE/PPTP options on the
Port Options
screen.
To use multiple PPPoE sessions on either port, configure the
Advanced
PPPoE
screen.
DNS
If using a
Fixed IP
address, you MUST enter at least 1 DNS address.
If using
Dynamic IP
or
PPPoE
, DNS information is optional.