Edimax EW-7438RPn V2 Quick Install Guide - Page 10
Reset the Extender
View all Edimax EW-7438RPn V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
III. Reset the Extender If you experience problems with your extender or if you want to change the extender to a different operating mode, you can reset the device back to its factory settings. This resets all settings back to default. 1. Press and hold the WPS/Reset button for at least 10 seconds until the green power LED is flashing. 2.Wait for the extender to restart. The extender is ready for setup when the green power LED displays on. 9
9
III.
Reset the Extender
If you experience problems with your extender or if you want to change the
extender to a different operating mode, you can reset the device back to its
factory settings. This resets
all
settings back to default.
1.
Press and hold the WPS/Reset button for at
least 10 seconds until the
green
power LED
is
flashing
.
2.
Wait for the extender to restart. The extender is ready for setup when the
green
power LED displays
on
.