Electrolux EI28BS56IB Use and Care Guide - Page 11

Removing the Doors 11 NOTE You will be pulling approximately three (3) feet of water tube from the back of the refrigerator. 4 Unscrew the three (3) lower hinge screws and hinge if necessary. To reinstall the right door, reverse the above steps. Lower Hinge Removal 3 Lift drawer up and out to remove. CAUTION Drawer is heavy. Use caution when lifting. Installing Freezer Drawer 1 With lower slides and basket pulled out, mount drawer in reverse of removal. 2 Tighten drawer screws then turn another 1/4 turn. 3 Check gasket seal around freezer drawer. Make adjustments on drawer screws if necessary. Once both doors are in place, ensure they are aligned with each other and level (Please see the "Installation" section for more details), and replace the top hinge cover. CAUTION Be sure doors are set aside in a secure position where they cannot fall and cause personal injury, or damage to the doors or handles. Removing Freezer Drawer 1 Open freezer drawer. 2 Remove drawer screws on right and left sides (two (2) screws on each side). NOTE DO NOT remove center screw from freezer drawer. This is a factory adjustment.