Electrolux EI28BS56IB Use and Care Guide - Page 32

32 Care and Cleaning Replacing LED Lights (select models) Both the freezer and fresh food compartments of your refrigerator include LED lights. Always use Electrolux parts for replacement. To replace LED Lights: 1 Unplug your refrigerator's power cord. 2 Remove light cover by pushing up and out. 3 Hold the LED cover with one hand and pull the connector with the other hand while pressing the connector latch. 4 Replace LED light and snap in place assuring the light is facing in toward the unit (inside fresh food and freezer) or facing outward on bottom of fresh food doors. CAUTION Wear gloves when replacing incandescent light bulbs to avoid getting cut. To replace light bulbs: 1 Unplug your refrigerator's power cord. 2 Wear protective gloves. 3 Remove light cover, if necessary. 4 Unscrew and replace old bulb with an appliance bulb of the same type and wattage (normally 40 watts). 5 Replace light cover, if necessary. 6 Plug in the refrigerator's power cord. LED Light Removal Refrigerator Light LED Light Harness Removal NOTE LED lights are in series so if one is bad or unplugged, several lights may not light up. Replacing Light Bulbs (select models) Both the freezer and fresh food compartments of your refrigerator include incandescent light bulbs that will need replacing from time-to-time. Some lights have covers that need to be removed before replacing the bulbs. Always use bulbs that are designed for appliance lighting. Freezer Light Ordering Replacement LED Lights Order new LEDs by calling 877-808-4195, online at www.electroluxappliances.com, or through the dealer where you bought the refrigerator. Here is the product number to request when ordering: LED Light, Part #241891101 Incandescent Lights (40-watt bulb), Part #5305514148