Electrolux EI28BS56IB Use and Care Guide - Page 12
Installing Door Handles
UPC - 012505747786
View all Electrolux EI28BS56IB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12 Installing Door Handles Door Handle Mounting Instructions 1 Remove handles from protective packaging. 2 Position fresh food handle end caps (A) over upper and lower pre-installed shoulder bolts (B) that are fastened into door, ensuring the holes for the set screws are facing towards the opposite door. 3 While holding handle firmly against door, fasten upper and lower Allen set screws (C) with supplied Allen wrench. 4 Repeat steps 2 and 3 to install opposite handle. Ensure the holes for the set screws are facing towards the first door. 5 Position freezer handle end caps over left and right pre-installed shoulder bolts that are fastened to the door, ensuring the holes for the set screws are facing down. 6 While holding handle firmly against door, fasten left and right Allen set screws (C) with supplied Allen wrench. Mounting Refrigerator Handles Mounting Freezer Handle NOTE To ensure that handles are flush with door, make sure that set screws are completely tightened.