Electrolux EI30GF35JS Complete Owner's Guide (English) - Page 38

38 Self-clean Setting self-clean A self-cleaning oven automatically cleans itself using much higher temperatures than those used for cooking. The self-clean feature eliminates soils completely or reduces them to a fine powdered ash that you can later easily wipe away with a damp cloth. The self-clean function provides 3 different clean time settings for self-cleaning. Set clean for 2 hours for light, 3 hours for normal or 4 hours for heavier soils. Once active, the door lock motor will begin locking the oven door. "door Loc" (Figure 4) will appear in the display. DO NOT try to open the oven door when the "door Loc" message is on (allow about 15 seconds for the oven door to completely lock). DO NOT force the oven door open. This could damage the door locking system. Once the oven door is locked the "door Loc" message will turn off and "CLn" (Figure 5) will remain in the display for the entire self-clean cycle. To start self-clean: Example Step Press 1. The oven should be empty and all oven racks removed. Remove all items from the cooktop. Be sure the oven door is completely closed. 2. Press self clean once for a 3-hour clean time (Figure 1); twice for a 4hour clean time (Figure 2) or 3 times for a 2-hour clean time (Figure 3). Fig. 4 Fig. 5 When the self clean cycle has finished: 1. The time of day and "Hot" will show in the display (Figure 6). 2. Once the oven has cooled (about 1 hour) and "Hot" is no longer displayed, the "door OPn" message will appear (Figure 7). When this message turns OFF the door has finished unlocking. 3. Press START. Fig. 1 Fig. 2 Fig. 3 Fig. 6 Fig. 7 3. When the oven is cool, wipe away any residue or powdered ash from the oven interior using a damp cloth or paper towel. NOTES • A self-clean cycle will not start if the control lock feature is active. • When the self-clean feature is active, you may check the amount of clean time remaining by pressing the self-clean keypad once. • If a self-clean cycle was started but did not finish due to a power failure, your oven may not have completely cleaned.