Electrolux EW23BC87SS Complete Owners Guide English - Page 20

Power Fail

Page 20 highlights

20 Controls - Dispenser Models IMPORTANT Pressing the system on/off icon does not turn off power to your refrigerator. You must unplug the power cord from the wall outlet. Setting cooling temperatures 1 Touch the glass panel to illuminate the 2nd level of display. 2 Select the options icon. Plus (+) and minus (-) indicators will appear on either side of the displayed temperatures. 3 Press the + or - indicator to adjust the temperature to the desired temperature settings. The temperature setting display will begin to blink with the first touch. After five seconds of inactivity, the display will beep to accept the new temperature. After 10 seconds, the display times out and returns to the basic display. Alarms Door Ajar High Temp NOTE The recommended settings for a product installed in a kitchen is 37˚F for the fresh food compartment and 0˚F for the freezer. IMPORTANT If your product has food freezing in the fresh food compartment, increase the temperature setting 1 or 2 degrees. Power Fail IMPORTANT If you place food within 1 inch in front of the air ports, there may be the chance of freezing food. If the door has been left open for an extended period of time, an alarm will sound and the door ajar indicator will display on the center of the display. The alarm is turned off by closing the door. The alarm off key will blink to prompt the reset of any pending alarms. Press this key to reset any system alarms. In the event of a high temperature condition, the temperature display will blink and display HI. After 20 minutes, the high temp alert will be displayed and the alarm off icon will illuminate until pressed, acknowledging the alarm, at which time the highest temperature reached will be displayed and the refrigerator will resume normal operation. All other modes are turned off until the alarm is acknowledged. In the event of a power failure, the power fail alert will be displayed and the alarm off key will blink until the alarm off icon is pressed, acknowledging the alarm. Other modes may be turned off until the alarm is acknowledged. When the power fail alert is turned off, the refrigerator will resume normal operation. The high temp alarm may also be illuminated until a safe operating range temperature has been reached. Air Port

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45

20
Controls - Dispenser Models
Setting cooling temperatures
1
Touch
the glass
panel to
illuminate
the 2nd
level of
display.
2
Select the
options
icon. Plus
(+) and
minus (-)
indicators will appear on either side of
the displayed temperatures.
3
Press the + or – indicator to adjust
the temperature to the desired
temperature settings.
The temperature setting display will
begin to blink with the first touch. After
five seconds of inactivity, the display will
beep to accept the new temperature.
After 10 seconds, the display times out
and returns to the basic display.
IMPORTANT
Pressing the system on/off icon does not
turn off power to your refrigerator. You must
unplug the power cord from the wall outlet.
Alarms
Door Ajar
If the door has been left open for
an extended period of time, an
alarm will sound and the door
ajar indicator will display on the
center of the display. The alarm is
turned off by closing the door. The
alarm off key will blink to prompt
the reset of any pending alarms.
Press this key to reset any system
alarms.
High Temp
In the event of a high tempera-
ture condition, the temperature
display will blink and display HI.
After 20 minutes, the high temp
alert will be displayed and the
alarm off icon will illuminate
until pressed, acknowledging the
alarm, at which time the highest
temperature reached will be
displayed and the refrigerator
will resume normal operation. All
other modes are turned off until
the alarm is acknowledged.
Power Fail
In the event of a power failure,
the power fail alert will be
displayed and the alarm off
key will blink until the alarm off
icon is pressed, acknowledging
the alarm. Other modes may
be turned off until the alarm
is acknowledged. When the
power fail alert is turned off, the
refrigerator will resume normal
operation. The high temp alarm
may also be illuminated until a
safe operating range tempera-
ture has been reached.
NOTE
The recommended settings for a product
installed in a kitchen is 37˚F for the fresh
food compartment and 0˚F for the freezer.
IMPORTANT
If your product has food freezing in the
fresh food compartment, increase the
temperature setting 1 or 2 degrees.
IMPORTANT
If you place food within 1 inch in front of
the air ports, there may be the chance
of freezing food.
Air Port