Electrolux EW23BC87SS Complete Owners Guide English - Page 32
Doors, Accessories varies by, model, Freezer Features varies, by model
View all Electrolux EW23BC87SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
32 Storage Features Doors Storage bins The doors to your fresh food compartment use a system of modular storage bins. All of these bins are removable for easy cleaning. Some of them have fixed positions, while others can be adjusted to your needs. Door bins are ideal for storing jars, bottles, cans, and large drink containers. They also enable quick selection of frequently used items. To change the position of an adjustable door bin: 1 Remove all food from bin. 2 Grip the bin firmly with both hands and lift it upward. 3 Remove the bin. 4 Place the Adjustable Door Bin bin just above desired position. 5 Lower the bin onto supports until locked in place. Accessories (varies by model) Tall bottle retainer The tall bottle retainer keeps tall containers in Tall Bottle Retainer the bin from falling forward when opening or closing the refrigerator door. To install, insert the ends of the retainer into the holes. Tilt can bins The can bins allow you to efficiently and securely store up to eight 12-ounce canned beverages. Tilt Can Bin Freezer Features (varies by model) Clip Stabilizer Bar Freezer Baskets To Remove Upper Freezer Basket 1 Find the side where the basket frame is aligned to the clip opening. The basket frame should be aligned to both front and rear clips on the same side (either left or right side). 2 If the basket frame is not aligned to the left or right side, push the basket sideways (to either side) until it is aligned. 3 By grabbing the basket wire frame close to the frontal clip, pull up to take the basket frame out. 4 Grab the basket frame close to the rear clip and pull up until it comes out of the clip. 5 Once one side of the basket is off the clips or retainers, slide the basket sideways until the other side of the frame is aligned with the clip openings on the opposite side of the freezer. 6 In the same way, pull up the basket frame from the frontal and rear clips until it is out of the clips. 7 Remove the basket. Reverse the steps to reinstall the basket. NOTE If basket is not resting on stabilizer bar retainer clips, the drawer will not close properly.