Electrolux EW23BC87SS Complete Owners Guide English - Page 7

Installation 7 Door opening NOTE The refrigerator doors are designed to shut by themselves within a 45 degree opening. Your refrigerator should be positioned to allow easy access to a counter when removing food. For best use of refrigerator drawers and freezer baskets, the refrigerator should be in a position where both can be fully opened. CAUTION Do Not loosen or remove these 3 hex screws. To level the cabinet using the front rollers: 1 Slightly open freezer drawer if the toe grill is installed. Lift the toe grille and gently pull forward. 2 Make initial cabinet adjustments by using the front roller height adjusting screws. Use a 3/8 inch socket wrench to turn the adjustment screws (1 per side). To raise: turn adjustment screw clockwise. To lower: turn adjustment screw counterclockwise. Raise Anti-tip Leg Lower DO NOT Loosen or Remove These 3 Hex Screws Cabinet Leveling & Refrigerator Door Alignment (if necessary) Guidelines for final positioning of your refrigerator: • All four corners of the cabinet must rest firmly on the floor. • The front should be slightly elevated to ensure that doors close and seal properly. • Doors should align with each other and be level. Most of these conditions can be met by raising or lowering the adjustable front rollers. 3 Ensure both doors are bind-free with their seals touching the cabinet on all four sides and that cabinet is stable. 4 After unit is leveled, lower anti-tip leg using a 3/8 inch socket wrench until it firmly contacts the floor. 5 Install the toe grille by fitting into place. Toe Grille Must Fit in Slot on Anti-tip Bracket Screw/Washer Assembly (3) Retaining Clips