Electrolux EW23BC87SS Complete Owners Guide English - Page 8
Installing Shelves select models
![]() |
View all Electrolux EW23BC87SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
8 Installation To make final door height adjustments: 2 Adjust flipper mullion height. For proper connection with the flipper mullion guide, there should be a separation about the thickness of a coin (0.060 inches, or 1.5 mm) between the guide and flipper mullion. Door Door Flipper Mullion Mullion Guide 1. Open freezer drawer to make lower hinge visible. 2. Insert 6mm Allen wrench into the shaft of the lower hinge. 3. Adjust the height by turning clockwise or counterclockwise. Turning clockwise will lower the door. Turning counterclockwise will raise the door. Default setting is to the lowest height when you receive your appliance. Raise To adjust the flipper mullion: 1 Loosen the screw located on the flipper mullion hinge. Thickness of a Coin Adjusting Flipper Mullion Height 3 Re-tighten screw. Installing Shelves (select models) Your refrigerator was shipped with the shelf hanger and glass shelves in a shipping pack. Below are the instructions to install and remove the shelves in your desired locations. 1 Place top hooks of the hanger into the desired slot, and lower straight down until lower hooks rest on the ladder. 2 Relock shelf by pushing the slide mechanism away from you. Flipper Mullion Flipper Mullion Hinge Screw Adjusting Flipper Mullion Screw
![](/manual_guide/products/electrolux-ew23bc87ss-complete-owners-guide-english-3e0f63b/8.png)