Electrolux EW23BC87SS Complete Owners Guide English - Page 9

Installation 9 3 While holding shelf at a 45-degree angle with the gray handle facing you, push the shelf into the back of the hanger. 6 Lift the hanger directly upwards and pull toward you to remove it from the ladder. 4 Gently set the shelf onto the hanger once the back is secured by the hanger. CAUTION Shelves must be removed prior to moving the refrigerator. Reposition the Air Seal (select models) 1 Remove air seal by pushing seal straight back. 2 Position the air seal towards the outside edge of the shelf to avoid the air tower when shelf is pushed back into place. 3 Install seal by sliding the open channel end of the seal onto back edge of shelf until seal sits snug on back of shelf and flap sits at about a 10 degree angle from shelf surface. 5 Remove shelf from its locked position by pulling the slide mechanism toward you. Air Seal Air Seal