Epson 11880 User's Guide - Page 149

Solving Problems | 149 Message Explanation Response SERVICE CALL ERROR NNNN If 1133 or 1137 appear, the Remove the brackets securing the print head; print head may be locked. see page 31. If 3000 appears, the printer is not plugged in correctly. A serious error may have occurred. Turn the printer off. Unplug the printer and wait 30 seconds. Then plug it in corrctly and turn it back on. Try turning the printer on and off a few times. If the message remains, contact Epson as described on page 10. TAKE-UP DISCONNECTED SET AUTO TAKE-UP REEL SYSTEM IN PRINTER AND RESTART THE PRINTER The auto take-up reel is not Install the auto take-up reel correctly. See installed. page 25. TAKE-UP ERROR SET PAPER PROPERLY IN AUTOMATIC TAKE-UP REEL SYSTEM Paper is not set up correctly in the auto take-up reel. Set up the paper correctly on the auto take-up reel. See page 29. TAKE-UP ERROR IS ANYTHING OBSTRUCTING THE TAKE-UP REEL SENSOR SYSTEM? LOAD PAPER AGAIN Something may be obstructing the sensor. Make sure nothing is obstructing the sensor system. Set up the paper correctly on the auto take-up reel. See page 29. Improving Print Quality You can often improve print quality by doing the following: • Run a nozzle check and cleaning cycle. See page 122 for instructions. • Align the print head. See page 126 for instructions. • When you send a print job, make sure your print options are set correctly. For more information, see Chapter 3 (Macintosh) or Chapter 4 (Windows). If none of these suggestions help, try the solutions on the following pages. 6-149