Epson 1520 User Setup Information - Page 7

5. Slide out the rear paper support guide until it stops. 6. Fan a stack of paper and then even the edges. Quick Setup 7. Load the stack with the printable side face down. (The printable side is usually whiter and brighter.) Slide the stack all the way into the feeder, with one edge of the stack touching the right edge guide. 8. Slide the left edge guide against the left side of the paper. Then slide the rear paper support against the end of the paper. 9. Lower the output tray. 6 Test the Printer 1. Turn off the printer and wait until the Operate light turns off. 2. While holding down the Load/Eject button, turn the printer on. Then release the Load/Eject button. The first page prints on the first and last lines to measure the page length. The next sheet prints a multicolor nozzle check pattern and character samples at 360 dpi (dots per inch). 3. After the second page prints, press the Pause button to stop the test. Then press the Load/Eject button to eject any paper remaining in the sheet feeder. Caution: Never turn off the printer while it's printing test pages. Always press the Pause button and eject any loaded paper first. 7