Epson 1520 User Setup Information - Page 9

Quick Setup Connecting to a Macintosh 1. Turn off the printer and your Macintosh. 2. Connect your serial cable to the serial connector on the back of the printer. Note: If you don't have a serial port on your Macintosh, use the USB Adapter Kit from Epson (part number C-USB-PK4). Connect the parallel connector on the adapter to the printer's parallel port, and the USB connector to your Macintosh's USB port. 3. Connect the other end of the cable to either the printer port or the on your Macintosh. modem port 8 Install the Printer Software Now you need to install the printer software so you can control printing from your computer. See the section below for your operating system. Installing the Windows Software 1. Make sure your printer is off. Then turn on your computer. Note: If you see a New Hardware Found wizard, click Cancel. Then make sure your printer is off. 2. If necessary, enter your administrator password. 9