Epson 1810p User's Guide - Page 68
Slide out the air filter on the bottom of the projector and, remove it.
![]() |
UPC - 010343858213
View all Epson 1810p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 5. Hold the lamp as shown and pull it straight out. 6. Gently insert the new lamp. (If it doesn't fit easily, make sure it is facing the right way.) 7. Once the lamp is fully inserted, tighten its screws. 8. Replace the lamp cover, then tighten its screw. 9. Slide out the air filter on the bottom of the projector and remove it. 10. Slide in the new air filter until it clicks in place. 11. Reset the lamp timer as described in the next section. 68 Maintaining the Projector
![](/manual_guide/products/epson-1810p-users-guide-d3b0bb6/68.png)
68
Maintaining the Projector
5.
Hold the lamp as shown and pull it straight out.
6.
Gently insert the new lamp. (If it doesn’t fit easily, make sure it is
facing the right way.)
7.
Once the lamp is fully inserted, tighten its screws.
8.
Replace the lamp cover, then tighten its screw.
9.
Slide out the air filter on the bottom of the projector and
remove it.
10.
Slide in the new air filter until it clicks in place.
11.
Reset the lamp timer as described in the next section.
note
The lamp(s) in this
product contain mercury.
Please consult your state and
local regulations regarding
disposal or recycling. Do not
put in the trash.