Epson 821p User Manual - Page 65
Setting a Password, Turning On the Password and User’s Logo, return to the Password Protect menu.
UPC - 010343852020
View all Epson 821p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Setting a Password 1. Press the Freeze button on the remote control for about 5 seconds until you see the Password Protect menu: note If a password has already been set, you see the Password Protect Release screen. See "Starting the Projector with a Password" on page 66. 2. Select Password and press Enter. You see the message Change the password? 3. Select Yes and press Enter. 4. Hold down the Num key on the remote control and use the numeric keypad to enter a 4-digit password. The password will be displayed as ****. After you enter the last digit, a confirmation screen appears. Enter the password again. 5. After you finish setting the password, press the Esc button to return to the Password Protect menu. Make a note of the password and keep it in a safe place in case you forget it. Hold down this button to activate the numeric keypad Turning On the Password and User's Logo 1. To enable the password, press the Freeze button on the remote control for about 5 seconds until you see the Password Protect menu 2. Select Power ON Protect and press Enter. 3. Select ON and press Enter. Then press Esc. Use these buttons like a numeric keypad to enter the password Fine-tuning the Projector 65