Epson 821p User Manual - Page 74
caution, covered, and the top of the cover should be flush with the top
UPC - 010343852020
View all Epson 821p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 6. Hold the lamp as shown and pull it straight out. caution Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 7. Gently insert the new lamp. If it doesn't fit easily, make sure it's facing the correct way. 8. Once the lamp is fully inserted, tighten its screws. note Be sure to seat the lamp fully and secure the lamp cover. If the lamp is not properly installed or the cover is loose, the lamp will not turn on. 9. Lower the lamp cover into place. (The opening should be almost covered, and the top of the cover should be flush with the top of the projector.) Then slide the cover closed and tighten the screw. 10. Reset the lamp timer as described in the next section. 74 Maintaining and Transporting the Projector