Epson 9600 Product Information Guide - Page 4

EPSON Stylus Pro 7600 and 9600 Consumables and Accessories Ink Cartridges When you install the printer's first ink cartridges, it takes about 10 minutes to initialize the printer. Do not interrrupt this process by turning off the printer, opening the printer covers, or releasing the paper set lever, or the printer will have to re-initialize. In that case, there may not be enough ink left in the original cartridges and you may have to replace them with new ones. When you installed the ink cartridges that came with the printer, it was initialized as either a Photographic Dye ink model or UltraChrome ink model. If you don't use the correct replacement cartridges for your model, you will see an error message and your printer won't work until you insert the correct cartridges. If you have a Stylus Pro 9600 that uses UltraChrome ink, you can install any combination of 110 and 220 ml cartridges. Unless you're planning to switch between black ink modes (see page 12), be sure to replace the black ink cartridges with the same type as you're currently using. Use the following cartridges before the expiration date on the package: Photographic Dye ink users: Black* T545100 Light cyan Cyan T545200 Light magenta Magenta T545300 Yellow * Your printer requires two black ink cartridges. T545600 T545500 T545400 UltraChrome ink users: Cartridge 110 ml 220 ml* Photo Black** T543100 T544100 Matte Black** T543800 T544800 Light Black** T543700 T544700 Cyan T543200 T544200 Magenta T543300 T544300 Light Magenta T543600 T544600 Light Cyan T543500 T544500 Yellow T543400 T544400 * Stylus Pro 9600 only. ** Your printer uses two black ink cartridges. Unless you are switching between black ink modes, use the same type of cartridges as are currently installed. Check their type by looking at the installed cartridges. If you install an incorrect cartridge, you will see the message WRONG INK CARTRIDGE. User-Replaceable Parts You can order these user-replaceable parts: Part Relacement Ink Maintenance Tank Replacement Printer Cutter Blade (replaces the printer's built-in cutter) Part number C120890071 C12C815241 Options The following options are available: Part Part number EPSON Stylus Pro 7600 Printer Stand C12C844061 EFI® Fiery® Spark Professional 2.0 Software RIP C842832 Internal 10/100 BaseT (Ethernet™) Type-B interface card C12C823912 Internal IEEE 1394 (FireWire™) Type-B interface card C823722 Automatic Take-Up Reel System (Stylus Pro 9600 only) C12C815251 Replacement 44-inch Take-up Reel Core (Stylus Pro 9600 only) C815121 Paper Roller Spindle (Normal Tension) - 2- or 3-inch Stylus Pro 7600: Stylus Pro 9600: C12C811161 C12C811151 Paper Roller Spindle (High Tension) - 2- or 3-inch Stylus Pro 7600: Stylus Pro 9600: C12C811155 C12C811152 Manual Media Cutting System* Stylus Pro 7600: Stylus Pro 9600: C12C815231 C815182 Replacement Manual Cutting Blade (for Manual Media C815192 Cutting System) * Designed for use with heavy media, which may damage the printer's built-in cutter. 5 - EPSON Stylus Pro 7600 and 9600 7/02