Epson Artisan 725 Quick Guide - Page 50
Printing and Copying Problems, Cannot scan over the network, Print a Network Status Sheet
View all Epson Artisan 725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Cannot scan over the network ■ Epson Scan is not available in Mac OS X 10.6; see page 30 for scanning instructions. ■ If you cannot scan from the product's control panel, make sure you restarted your computer after installing the product software. Make sure Epson Event Manager is not being blocked by your firewall or security software. ■ If you are scanning a large photo or document at high resolution, a communication error may occur. If the scan did not complete, lower the resolution. ■ If network communication was interrupted while starting Epson Scan, exit Epson Scan, and restart it after a few seconds. If Epson Scan cannot restart, turn the product off and on, and then try again. Check the Timeout Setting in EPSON Scan Settings. For details, see the Epson Scan Help. Print a Network Status Sheet 1. Press Home, until Setup is selected, then press OK. 2. Press u or d to select Network Settings, then press OK. 3. Press u or d to select Confirm Network Settings, then press OK. 4. Press x Start to print a network status sheet. Printing and Copying Problems ■ Make sure your paper is loaded printable side down (usually the whiter, brighter, or glossy side). Don't load paper above the edge guides. ■ Make sure the type of paper you loaded matches the paper size and paper type settings on the control panel when copying or printing (see page 15), or in your printer software (see page 26). ■ You cannot print or copy when an ink cartridge is expended even if the other cartridges are not expended (but you can still scan and view photos on the display screen). Replace any expended cartridges before printing or copying. ■ For 2-sided printing with Macintosh, you may see a message that the auto duplexer is not installed. Open EPSON Printer Utility 4 (in the Applications/ Epson Software folder), click the Printer and Option Information button, and click OK. Then close and reopen the print window. 50 Solving Problems